HVAC Avondale Gardens Chicago2018-11-13T09:25:50+00:00

HVAC Avondale Gardens Chicago | Expert Energy Efficient System Designs

Value Engineering Pdf
Contact Us

Don’t be misled by our NY-Engineers.Com is your best bet if you are looking for Full Service Heating & Air Conditioning (HVAC) Engineering Firm in Chicago Illinois. We’re not only an HVAC Companies in or near Chicago but also a leading provider of Value Engineering Engineering services throughout Avondale Gardens Chicago. Call us at (312) 767-6877

Contact Us

Recently Hundreds of individuals have been stopping by our website searching for Electrical Engineering in Chicago. This is due primarily due to the following we have built in this kind of work. However, a lot of building managers from East Chicago to Rock Island, Illinois, do not know that NY Engineers is also a top contender for anyone searching for HVAC Chicago, Illinois.

The search for power efficient buildings involves cost effective HVAC system design. This can include systems for architectural enclosure, domestic water heating, lighting, HVAC, and vertical transportation. The loads for your HVAC systems should come primarily from 5 different bases including lighting (cooling), your building envelope (cooling and heating), ventilation (cooling and heating), equipment for program use (cooling) and occupancy (cooling).
The ventilation load is a function of either the machines needed to be able to introduce it into a space and control contaminant concentration or the quantity of people that may occupy the space. In nearly all climates within the eastern and southwestern parts of the usa, to lower outside air flow helps you to save energy whenever the surface air is either warm and humid or very cold.
Managing the ventilation rate will likely be dependant on occupancy which is called a type of demand control ventilation. This really is a everyday sort of energy conservation tatic that is utilized for buildings with occasional or crowded occupancy. Having heating and cooling loads reduced to a minimum can be carried out through the use of an increased performance building envelope, occupancy sensors, and performance lighting that uses daylight response of lighting controls.

Chicago HVAC Engineering services versus HVAC Technicians

If you have ever thought about the difference between a HVAC Engineers versus HVAC Engineers, then continue reading:

Chicago HVAC engineers are definitely the people that watch over installing of air conditioning systems for residential and commercial buildings. They spend a great deal of their day in offices doing higher-level management and planning of installations nonetheless they do also visit job sites every now and then.

In comparison, HVAC technicians in Chicago tend to do a lot of hands-on work with repair and maintenance. A HVAC tech may assist an engineer to complete some of the installation work, specifically for smaller jobs. Generally speaking HVAC techs do considerably more travel and may spend considerable time changing filters, identifying leaks, doing recharges or getting rid of old and outdated systems that use old refrigerants.

HVAC engineers may have the opportunity to make more decisions about systems that are used, and they also are the people that would offer advice about the most sensible refrigerants and which systems would be perfect for a bigger building. In the industry, there is certainly some competition between ‘the suits’ and ‘the ones that get their hands dirty’, but the two jobs require an effective understanding of how air cooling does work. As of late huge crowds have been reading our sites looking for things like HVAC Chicago Repair. However, the goal of our organization is to become the number one choice for anyone looking for a HVAC Chicago and or any of our other services including Protection Engineering services. We ask that anybody searching for more information about our Heating Cooling Air Conditioning Furnace (HVAC) Engineering Firm in Chicago Illinois checks out at our blog.

New Post Related to HVAC Chicago

A Plumbing Engineering Expert Explains Storage and Demand-Type Water Heaters

MEP Engineers

Water heaters are household appliances that normally use natural gas or electricity to produce heat, and often include a tank to store hot water. These plumbing engineering systems provide a very important service for modern society, especially in locations with cold winters. Water heaters represent a significant portion of building energy expenses, so an optimal design is very important to achieve low-cost operation.

The following summarizes the main types of water heaters:

Traditional tank-type water heaters work with either gas or electricity. They offer a large volume of hot water that can be dispersed throughout your entire home, and typically keep the stored water at a temperature near 120°F at all times. Oil-fired models are also available but have a higher running cost than gas heaters and pollute more than other plumbing engineering solutions for water heaters.

Heat pumps also use a storage tank but differ from conventional electric heaters in the method used to raise water temperature. While conventional heaters apply voltage to an electric resistance, heat pumps are like a refrigerator operating in reverse: they cool the surrounding air to heat the water inside.

Tankless or demand-type water heaters do not store hot water, but rather heat it quickly on demand. These are also available in both gas-fired and electric versions.

How to Select a Water Heater

The selection process for a water heater depends on the specific subtype. For example, tankless heaters must be sized to provide rapid heating in short bursts, while storage heaters can provide a steadier and less intense heat output. Regardless of the type of heater chosen, consider that saving water also saves energy, since there are less gallons to heat per day.

1)   Tankless or Demand-Type Water Heater

The first step is to identify the required flowrate in gallons per minute (GPM). To provide an example, consider the following figures from 2010 plumbing standards:

  • Bath lavatory sink = 0.5 GPM
  • Standard shower = 2 to 2.5 GPM
  • Total demand = 3 GPM.

The next step is to determine the temperature rise needed, from the difference between the required water temperature and the incoming water temperature. In this example, if the required temperature is 110°F and the incoming temperature is 57°F, the temperature rise is:

  • Temperature rise = 110°F – 57°F = 53°F

In this application, it would be necessary to select a water heater that runs at 3 GPM with a 53°F heat rise. This is very different from conserving water at 110°F inside a tank, since the demand-type heater must achieve the full temperature rise the moment water flows through.

2) Storage-Type Water Heater

The design approach here is different, since this type of heater keeps a reservoir for when hot water is needed. Hot water demand is typically analyzed in gallons per hour (GPH) instead of gallons per minute (GPM). Normally, GPH values come from local plumbing codes, while demand factors and storage factors for commercial and residential occupancies are mentioned in ASHRAE Codes.

Consider the following example:

  • Hot water demand = 492 GPH
  • Demand factor = 0.3 (for private residences per ASHRAE)
  • Storage factor = 0.7 (for private residences per ASHRAE)
  • Temperature rise (ΔT) = 100°F

The first step is to determine the required recovery rate, which describes how many gallons of water must be handled by the heater per hour. This value is obtained by multiplying the total hot water demand and the demand factor:

  • Recovery rate = 492 GPH x 0.3 = 147.6 GPH

The actual heat input is calculated as follows:

  • Heat input (BTU/H) = Recovery Rate (GPH) x ΔT (°F) x Specific Heat (BTU/gal °F)
  • Heat input (BTU/H) = 147.6 GPH x 100°F x 8.33 BTU/gal °F = 122,950.8 BTU/H
  • Heat input (BTU/H) = 123 MBTU/H (thousand BTU per hour)

The required capacity of the tank is determined by the storage factor:

  • Tank capacity = Recovery Rate x Storage Factor
  • Tank capacity (gal) = 147.6 GPH x 0.7 = 103 gal

In this application, the water heater must have a capacity of 123 MBTU/H at 100°F temperature rise and a recovery rate of 147.6 GPH.

Advantages and Disadvantages of Each Heater Type in Plumbing Engineering

Like with any engineering decision, water heaters come with distinct advantages and disadvantages. This section summarizes the strong points of each technology, as well as the limitations.

Storage-type Water Heater

Advantages:

  • Lower initial cost – A traditional water heater can cost half as much as a tankless water heater.
  • Easy and inexpensive to replace – A simpler installation means there’s less that can go wrong. Maintenance and reparations have a lower cost.

Disadvantages:

  • Higher utility bill – Water is heated and reheated at a preset temperature regardless of your hot water needs. This increases your utility bill, especially during the winter.
  • Space requirements – They occupy more room and can’t be placed outside.
  • Can run out of hot water – Ever been the last in your family to get the shower? It’s a chilling experience. This problem can be avoided by purchasing a larger tank, but this also leads to more energy costs because a larger volume of water must be kept hot.
  • Shorter service life – This type of heater lasts 10-15 years. As a result you have to buy them twice as often as tankless water heaters.

Tankless Water Heater

Advantages:

  • Saves money in the long run – For homes that use below 41 gallons of hot water per day, demand-type water heaters can be 24–34% more energy efficient than conventional storage heaters.
  • Compact and versatile – They are small and can be installed in more places compared with storage heaters, even outside a wall.
  • Longer service life – Last 20 years or more, almost doubling a traditional water heater’s service life.
  • Deliver hot water on demand – Tankless heaters provide two to three gallons of hot water per minute on demand. This can up to 5 GPM with gas-fired heaters.

Disadvantages:

  • Higher initial cost – Cost between $2800 to $4500 installed, depending on the model and supplier.
  • Retrofitting adds to upfront cost – Replacing a traditional water heater with a tankless system is more complicated, since the capacity of the electric or gas service entrance must be increased in most cases.

Which Are The Best Applications for Each Type of Heater?

Storage-type water heaters tend to work best when demand for hot water is constant and fluctuating, where low-demand periods can be used to replenish the tank. Some examples of suitable applications are restaurants, commercial areas, residential apartments and hotels.

Tankless water heaters are better suited for applications where the demand of hot water is well-known and occurs occasionally in short bursts. Some suitable applications are remote bathrooms and hot tubs. These heaters are also useful as boosters for dishwashers, clothes washers and other similar appliances. They can also complement solar water heaters that are unable to meet hot water demand by themselves.

If you are considering a new domestic hot water system, the best recommendation is to get professional assistance. A plumbing engineering professional will help ensure the DHW system will be adequate for the needs of your building.

Top Searches Related to HVAC Chicago