HVAC Engineering Englewood Chicago, IL2018-10-14T14:56:33+00:00

What Can Our HVAC Engineers in Englewood Chicago Do For You?

Contact Us

When you’re looking for a competent HVAC Engineering in Chicago? Your best bet is to contact is NY Engineers. Not only for HVAC Firms in Chicago but also Construction Engineering and Sprinkler System Engineering throughout Englewood Chicago. Call us at (312) 767-6877

Contact Us
How To Become An HVAC Engineer

Since 2011 a lot of developers throughout East Patchogue, NY already know that NY Engineers is the engineering firm to call when you’re searching for Value Engineering in NY. What many local property owners have not realized is the New York Engineers is also your top choice if you are looking for HVAC Engineering services in Englewood Chicago, IL. If you want additional details on what Englewood Chicago HVAC design engineers do? This is an exceptional career with an a detailed listing of responsibilities. An HVAC design engineer will be asked to get through a number of problems to resolve the core issue. This career calls for distinct talent, competence, and the opportunity to handle time prudently.

As soon as an HVAC contractor is certified to work, they will be hired by an engineering company and start to work on various heating, cooling, and refrigeration systems. Their task is usually to draw up new and/or additional choices based upon their client’s requirements. Each client is going to have a unique set of wishes whether or not it is related to developing codes or personal performance prospects. Using all of this info, the engineer sets off on a trek towards building something which is eco-friendly, energy-efficient and well suited for the location it’s going to be placed in – (residential/industrial/commercial). They usually are liable for the primary drawings and managing the exact installation.

Generally speaking, an HVAC design engineer in Englewood Chicago is going to be seen working with a design company or perhaps in a consulting team according to their numerous years of expertise. A great deal of engineers shift right into a consulting job because they mature and acquire a better comprehension of what’s expected of them.

Comparing HVAC Engineer vs HVAC Technician

HVAC Technician and HVAC Engineer are frequently mistaken for one another. Nevertheless, they have got separate job functions in relation to handling HVAC systems. It’s essential to are aware of the variance both as a parton as well as an expert

An HVAC technician in Englewood Chicago carries a more direct job, which means they are usually seen going to a owner’s building to look at their current system. They often times keep up with the installations, repairs, and over-all care which is required every now and then. Nearly all of their work is done in conjunction with the customer, which implies they must discover how to interact with people properly.

Having an HVAC engineer, they are accountable for designing a whole new HVAC system and making certain it fits just what a customer wants. It must fit just what the house owner needs whether it has to do with their setup, property, or anything else related to new system. They are also introduced to consult on HVAC creations to be certain things are consistent with modern standards. That is why they may find themselves spending time in consulting firms or at local engineering firms. That is basically the difference between these vocation choices; HVAC Engineer vs HVAC Technician. Even with all of this information you would like additional details about the HVAC Engineering services in Englewood Chicago, Illinois by New York Engineers you should check out at our Englewood Chicago Building Commissioning blog.

Englewood Chicago HVAC Engineering Related Post

Construction Engineers Explain How HVAC Systems Move Heat

Architectural Engineering Colleges

Heat movement is required for both space heating and air conditioning. Space heating systems deliver heat and air conditioning systems remove it, but the goal in both cases is reaching a suitable indoor temperature. Construction engineers can explain how, though heat can be transmitted across empty space by radiation, using convection and the bulk movement of a fluid is much more effective. In HVAC applications, the most common fluids used to carry heat are air, water, refrigerants, and steam.

Since each substance has different properties, the heat distribution fluid used by an HVAC system determines many performance features. Also consider that different fluid may be used in the same system, with intermediate heat exchange steps.

Heat Distribution with Air

The main advantage of using air to carry heat is simplicity: air is already present in the atmosphere and indoor spaces, so there is no need to use additional fluids in the HVAC system.  Air can interact directly with AC compressors, furnaces or heat pumps to adjust its temperature, and it can then be distributed using fans and ductwork.

However, air ducts require more space than the piping used by other heat-carrying fluids, and they are impractical when air must travel long vertical distances. Consider that warm air rises while cool air tends to fall below, and fan power increases dramatically if you need to move air against its natural behavior. This is neither practical nor energy efficient!

When air ducts must serve separate zones, its distribution is typically controlled with air dampers. These can adjust their position between fully open and fully closed as needed to regulate airflow, and they are controlled automatically by the thermostats in each zone.

One of the most promising system upgrades for air distribution systems promoted by construction engineers is adding variable frequency drives (VFD) to the fans. Reducing fan speed is much more efficient than intermittent operation when you don’t need the full rated airflow. In the case of fractional horsepower fans, a brushless DC motor is recommended instead of a VFD, since they come with built-in speed control.

Packaged rooftop units are an example of an HVAC system that uses air as the main heat distribution and heat removal medium.

Heat Distribution with Water

Some HVAC systems heat or cool water instead of air, and water then interacts with indoor air through fan coils. When this configuration is used, the installation is referred to as a hydronic system. Compared with air, water can hold much more heat per unit of volume, thanks to its higher specific heat and density. As a result, it is the preferred heat-carrying medium in large commercial and industrial installations: hydronic piping uses much less space than air ducts for a given heating or cooling load.

Just like airflow can be controlled with dampers and VFD-equipped fans, the flow of water in a hydronic system can be controlled with valves and VFD-equipped pumps. The basic principle is the same: finding an operating point where each zone is kept at the required temperature and humidity, at the lowest energy cost possible.

Chillers and boilers are two examples of HVAC systems that rely on water to carry heat. Indoor air can then be heated or cooled using fan-coils. Another possible configuration is using larger air-handling units (AHU) connected to an air duct system, where heat exchange occurs between the hydronic piping and the air being circulated by the AHU.

Refrigerant

All air conditioning compressors and heat pumps use refrigerant internally, but there also HVAC systems with longer refrigerant lines connecting different pieces of equipment. Refrigerant lines are even more compact than hydronic piping, not to mention air ducts. Just like when water is used to carry heat, refrigerant flow can be controlled with the combination of valves and variable speed control for the compressor.

Ductless air conditioners and heat pumps use refrigerant lines between the condenser and evaporator units, and typically offer a very high efficiency. The concept can also be applied for multiple zones served by a single outdoor unit, using a variable refrigerant flow system (VRF). VRF systems are very efficient as well, while consolidating heating and cooling systems into a single installation.

Steam

Many buildings in New York City use steam as a heat-carrying fluid, since a significant portion of the city gets steam as a utility service from Con Edison. However, if you plan to install your own boiler, a hot water system is preferred over a steam system.

The main drawback of steam is that you can use it only for heating in most cases. The only way to achieve cooling with steam through an absorption chiller, but a conventional electric chiller is much more economic in multifamily and commercial settings. Absorption chillers are better suited for applications where heat is available at a very low cost or as a waste product of industrial activity – not when you are paying for steam as utility service.

Since steam cannot be used directly for cooling, buildings with steam radiators often have window-type or through-the-wall air conditioning units. These normally suffer from poor efficiency, so you can consider upgrading to ductless units while the heating system is retrofitted to use hot water.

Our Construction Engineers’ Conclusion

HVAC systems are characterized by their variety, and each configuration brings a different set of performance features. Working with qualified HVAC consultants and construction engineers is recommended to identify the system configuration that works best, according to the specific needs of your building. Also keep in mind that only a registered design professional can submit HVAC designs for approval by the NYC Department of Buildings.

Top searches related to HVAC Engineering in Englewood Chicago, Illinois.