HVAC Engineering Kennedy Park Chicago, IL2018-10-15T18:59:09+00:00

What Can Our HVAC Engineers in Kennedy Park Chicago Do For You?

Contact Us

When you re looking for a reliable HVAC Firms in Chicago? Your best bet is to call is New York Engineers. Not only for HVAC Firms in Chicago but also Value Engineering and Protection Engineering in or near Kennedy Park Chicago. Contact us at (312) 767.6877

Contact Us
Value Engineering Pdf

For more than 10 years the majority of building owners throughout Buffalo, NY already know that NY-Engineers.Com is the engineering company to contact when you are searching for MEP Engineering in New York City. What many local property owners have not realized is the NY-Engineers.Com is also your top choice if you are searching for HVAC Engineering services in Kennedy Park Chicago, Illinois. Those who need more information on what Kennedy Park Chicago HVAC design engineers do? This is an exceptional task which inclides an extensive selection of obligations. An HVAC design contractor will have to work through a variety of challenges to resolve the basic issue. This job requires distinct talent, professionalism, and the ability to deal with time cleverly.

Once an HVAC engineer is licensed to work, they will get employed by an engineering firm and start to operate various cooling, heating and refrigeration systems. Their responsibility is usually to draw up new and replacement choices in line with their client’s requests. Every single customer is going to have a unique set of wishes whether or not it involves building codes or personal performance anticipations. Making use of this data, the engineer goes on a ride towards making something that’s eco-friendly, energy-efficient and perfect for the location it’s likely to be placed in – (residential/industrial/commercial). They are often responsible for the initial drafts and overseeing the particular installation.

On the whole, an HVAC design engineer in Kennedy Park Chicago will likely be seen working at a design business or perhaps in a consulting team based on their years of skill. Many engineers transition in to a consulting job as they become older and achieve a better knowledge of what’s expected of them.

Comparison: HVAC Engineer vs HVAC Technician

HVAC Engineer and HVAC Technician tend to be mistaken for one another. Still, they do have different job functions in relation to dealing with HVAC systems. It is crucial that you be aware of the difference both as a customer and as a professional

An HVAC technician in Kennedy Park Chicago has a more hands-on job, meaning they are usually seen going to a owner’s home to inspect their current system. They often times handle the repairs, installations, and overall care which is needed every now and then. Nearly all of their job is done alongside your client, which suggests they need to understand how to communicate with people in the right way.

With the HVAC engineer, they are accountable for designing a brand new HVAC system and making certain it fits exactly what a customer wants. It needs to fit precisely what the property owner needs whether or not this involves their setup, property, or everything else related to new system. They are also introduced to refer to HVAC designs to make sure all things are in accordance with today’s standards. This is the reason they could end up hanging out in consulting firms or at local engineering companies. That is basically the difference between these two vocation choices; HVAC Engineer vs HVAC Technician. There’s only so much you can save this page if you would like additional info on the HVAC Engineering services in Kennedy Park Chicago, IL by NY-Engineers.Com we invite you to take a look at our blog.

Kennedy Park Chicago HVAC Engineering Related Post

Cut Costs: Simplify Your MEP Engineering Design

Construction Engineering Vs Civil Engineering

There are savings opportunities throughout the entire engineering process, not just the construction stage. With effective communication and adequate team management, it is possible to optimize the design process and reduce costs of your MEP engineering project without compromising quality. High-level design software also helps: it may come at a high price, but the time and cost savings are significant.

When the engineering design process becomes long and expensive, it is typically due to one of the following factors:

  • Poor communication between design teams. This is especially important in the case of mechanical, electrical and plumbing systems – all three have complex physical layouts, and there is a high chance of overlap between components of different systems when team communication is poor.
  • Excessive changes. MEP designs are carried out on existing architectural plans, which means architectural changes can become very disruptive as the MEP design process approaches completion. Completing the final version of the architectural design is highly recommended before MEP design starts; a major architectural change after MEP design has been completed can greatly extend the design process and its cost. Changes to MEP systems are also disruptive, since they have a high degree of interdependence.

This article will provide some recommendations that can help you simplify the engineering design process while reducing its cost. There is a basic rule of thumb for cost optimization: modifications are cheap or even free when requested early in the design process, and prohibitively expensive when requested in the final stages of construction.

1) Involve All Project Stakeholders Before the Design Process Starts

If the needs and requirements of all parties are clearly stated from the beginning, they can be accounted for during project design. For example, some contractors and equipment vendors may have special requirements; if this information is known before MEP engineering design starts, changes are avoided later. These changes normally add man-hours to the design process, and if omitted they may result in expensive modifications during construction.

Make sure your MEP design team reviews all equipment specifications before the design process starts, ensuring any special requirements are accounted for. Keep in mind that some building systems involve all three areas of MEP; for example, chilled water systems involve both electrical installations and hydronic piping.

2) Follow an Integral Approach for Mechanical, Electrical and Plumbing Design

As previously stated, these three systems have very complex layouts, and if design teams don’t work in coordination, you are very likely to have issues with overlapping equipment locations. Also, keep in mind that all three systems distribute fluids or air throughout the building, and the means of distribution must not interfere with each other.

  • Mechanical systems typically involve air ducts, refrigerant lines and hydronic piping. If combustion-based heating is deployed, there will also be a chimney for flue gases, along with fuel piping and tanks.
  • Electrical Systems involve conduit and wiring, and there are also bus ducts in high-power applications. Keep in mind that transformers, motors, generators, panelboards and similar equipment may require a lot of space, and clearances may be required with respect to walls and other pieces of equipment.
  • Plumbing Systems involve pumps, as well as independent piping for potable water, wastewater, etc.

The layout of ducts and piping must be specified so that the least amount of materials is used, but taking care not to overlap components from different building systems.

3) Use Three-Dimensional MEP Engineering Design Software

There are now MEP design solutions where a three-dimensional model of the building is stored in a web server that can be accessed by all design teams, and building systems are laid out and specified directly on the model. This offers several advantages over conventional two-dimensional design:

  • Equipment locations can be visualized more clearly, especially when components from all three systems must be installed in tight spaces.
  • Modern MEP design software is smart enough to detect overlap, and design engineers can be notified immediately if it occurs. For example, if the optimal location for two pieces of equipment is the same, they can decide which of the two devices can be relocated for the least cost.
  • The confusion associated with different versions of the same design is eliminated; versions no longer exist, since the entire design process is carried out on a unified 3D model.
  • Most three-dimensional MEP design software can calculate all bills of materials (BOM) automatically, further reducing the total man-hours required for the project.

MEP design software has a high upfront cost, but the investment is compensated by the sheer number of man-hours saved. Also, there are now software solutions with the option of paying a recurring monthly fee, instead of an expensive one-time license. This purchasing model tends to be more attractive for smaller companies with limited budgets.

Having a well-trained staff is just as important as implementing a powerful software solution. If you will invest in a high-level MEP design package, make sure your engineering team learns how to use it effectively. For example, software solutions often have keyboard shortcuts and commands that considerably speed up the work, and using them is much faster than clicking on functions with the mouse. The difference may not be evident for a single action, but when you consider the total man-hours saved the effect is significant.

4) Use a Project Management Platform

E-mail is not always practical when coordinating multidisciplinary teams: tasks must be assigned textually, and there is always the chance of missing or misspelling one of the e-mail addresses. There are now project management platforms where team members can be added to common dashboards, and notifications are sent automatically whenever a task is assigned, modified or completed.

Project management platforms allow team members to focus on the tasks assigned, while communication is streamlined and automated in the background. For example, marking a milestone as finished and linking a project deliverable is faster than sending an e-mail to the entire team with the file as an attachment.

5) Consider Outsourcing the Entire MEP Design Process

Having an in-house engineering team may make sense in industrial settings, or other business sectors where technical assistance is required on an ongoing basis. However, there are companies for which the cost of a permanent engineering staff can’t be justified, and in makes more sense to hire an external firm specializing in MEP design and consulting. This way, the client can save the capital and time required for workstations, software and team building, dedicating it to core business activities instead.

If you will follow this approach, we strongly recommend you hire a firm that provides integral MEP design; if you hire separate designers for mechanical, electrical and plumbing installations, projection integration will be a daunting task.

Concluding Remarks

When optimizing the engineering design process, remember that poor team communication and frequent changes are the main factors that increase costs. With the combination of solid management practices, information technologies and strategic outsourcing, you can improve results while cutting costs. Effective communication before and during your MEP engineering project also promotes collaboration and mitigates conflict.

Common searches related to HVAC Engineering Kennedy Park Chicago, IL.