HVAC Engineering Palmer Square Chicago, IL2018-10-09T09:03:23+00:00

What Can Our HVAC Engineers in Palmer Square Chicago Do For You?

Contact Us!

When you’re searching for a fast responding HVAC Chicago? The one to go to is New York Engineers. Not only for HVAC Firms in Chicago but also Mechanical Engineering and Sprinkler Design Engineering near Palmer Square Chicago. Call us at 312 767-6877

Contact Us!
Construction Engineering Companies

Since coming to market a lot of construction companies throughout West Seneca, NY already know that New York Engineers is the engineering firm to contact if you’re searching for Architectural Engineering in New York City. What a lot local building owners have not realized is the New York Engineers is also your top choice if you’re looking for HVAC Engineering services in Palmer Square Chicago, IL. If you need to learn more about what Palmer Square Chicago HVAC design engineers do? This is an exclusive profession that has an extensive list of responsibilities. An HVAC design engineer will have to get through numerous challenges to resolve the basic issue. This career requires special skill, competence, and the cabability to manage time cleverly.

As soon as an HVAC personel is licensed to work, they will get employed by an engineering business and start to operate various cooling, heating and refrigeration systems. Their role is to draw up new and replacement choices based upon their customer’s requests. Every single customer is going to have an original set of wants whether it involves developing codes or personal performance expectations. Using all of this information, the engineer sets off on a trek towards creating something which is eco-friendly, energy-efficient and ideal for the place it’s likely to be utilized in – (residential/industrial/commercial). They usually are liable for the first drawings and overseeing the particular installation.

In general, an HVAC design engineer in Palmer Square Chicago is going to be seen working at a design company or in a consulting firm based on their years of skill. Many engineers transition in to a consulting job as they get older and acquire a better understanding of what’s expected of them.

Comparison: HVAC Technician vs HVAC Engineer

HVAC Technician and HVAC Engineer tend to be mistaken for each other. But, they do have separate tasks when it comes to managing HVAC systems. It’s vital that you be aware of the contrast both as being a parton also as a professional

An HVAC technician in Palmer Square Chicago is a more practical job, which suggests they are often seen visiting a customer’s building to check out their present system. They often take care of the installations, repairs, and general care that is required every now and then. Nearly all of their work is done together with the customer, which suggests they have to discover how to connect to people in the correct manner.

By having an HVAC engineer, they are responsible for creating a new HVAC system and ensuring that it meets exactly what a customer is after. It has to fit exactly what the house owner needs whether or not this involves their setup, property, or everything associated with new system. Also, they are brought in to consult on HVAC creations to make sure things are consistent with modern standards. For this reason they may wind up spending time in consulting assignments or at local engineering businesses. That is basically the difference between these career paths; HVAC Technician Versus HVAC Engineer. There is only so much you can save this page if you would like more details about the HVAC Engineering services in Palmer Square Chicago, Illinois by New York Engineers we invite you to take a look at our Palmer Square Chicago Fire Protection Engineering blog.

Palmer Square Chicago HVAC Engineering Related Article

How to Select a Contractor for Mechanical Engineering Projects

MEP Engineering Pdf

Tips for Effective Contractor Selection in Engineering Projects

One of the key elements that determines project success is selecting the right contractor for the job. Although it may be tempting to focus on minimizing cost, a better approach is to maximize value and optimize cost. After all, a mechanical engineering project of any kind is an investment; the best offer is not always the one with the lowest price, but the one that offers the highest return on each dollar spent.

Effective communication is key during the bidding process: if the participating contractors understand the project requirements clearly, they can craft their proposals accordingly. Without proper specifications, even the most qualified contractors may struggle to provide a suitable offer. Effective communication is so important for project success, that the Project Management Institute dedicates a whole chapter of its Body of Knowledge to the topic.

Before proceeding with a bidding process, hiring an engineering consulting or supervision firm is highly recommended. They can help you expedite the process, while providing technical guidance and managing correspondence with contractors. Even with a clearly defined project scope, it is normal for contractors to request additional information or clarifications.

Bid Leveling: Setting a Common Ground for Comparison

Project bids can only be compared with each other if the contractors are quoting the same scope of products and services. When sending a Request for Proposals (RFP), include a scope document that breaks down the work into specific items, and where each item is priced individually. This allows bids to be compared side by side, something not possible when each contractor provides a different breakdown of the project work.

Creating a detailed project scope consumes extra time at the beginning but saves much more time later in the process. Since bids can be directly compared to each other, communication becomes more effective during the contractor selection process, reducing the number of clarifications and requested corrections.

The Project Management Institute (PMI) recommends using a Work Breakdown Structure (WBS) to define project scope. In simple terms, a WBS decomposes the project work into a series of levels, where work definition becomes more specific for each descending level, and specific project items are described at the lowest level. The following is an example:

  • A construction project WBS may have a category called Electrical Installations(Level 1).
  • That category can be subdivided into sections such as Lighting Installationsor Electrical Receptacles (Level 2).
  • Specific lighting fixturesare specified in the lighting installations section, as well as their required quantities (Level 3). For example, an item in the list can be described as: Recessed Commercial LED Fixture, 2ft x 4ft, 4000 lumens, clear white light (4100K). This is an item that can be priced specifically by the contractors participating in the bid.

A list of items that is broken down by categories and subcategories is much easier to understand than a plain list where elements from different building systems are combined. An engineering consulting firm can help you put together a WBS effectively. With this bidding format, detecting discrepancies also becomes easier; for example, if five contractors are participating and one of them priced an item significantly lower than the other four, it is likely that there was a mistake or misinterpretation.

Importance of a Mechanical Engineering Professional’s Technical Point of View

When comparing bids for a project, the opinion of a neutral and qualified third party is highly recommended, and the best recommendation is to hire the services of an engineering consulting or supervision firm. This way, each item on the project scope can be assessed based from the financial and technical standpoint in relation to mechanical engineering, ensuring that the price provided by a contractor is reasonable according to technical specifications. To define what can be considered cheap or expensive in engineering, a degree of industry know-how is required.

An engineering consultant or firm can also determine if any items in the project scope are priced too high or too low, and then request a clarification from the respective contractor. Low prices are only good news if they are reasonable; unrealistic prices are likely the result of a mistake by the bidding contractor. However, these conclusions can only be reached with a thorough understanding of different building systems and the prices that can be expected.

Equipment Submittals

In simple terms, submittals can be defined as any information on equipment and materials, provided by a contractor for approval before the project is awarded. Some of the most common types of submittals include technical cut sheets, shop drawings and material samples.

Building system components must generally meet a series of requirements and standards. Equipment from reliable manufacturers comes with technical cut sheets, which provide a detailed description of product features and compliance. However, not all contractors work with the same providers, and the contractor selection process may involve comparing equipment from different suppliers for a single item in the project bid. Although equipment cut sheets are available in the Internet, searching for them can be very tedious when dealing with a large project. For this reason, it is very important the contractors participating in a bid provide cut sheets of all the proposed equipment.

Some elements of building systems that perform critical functions or involve a high degree of complexity cannot be described effectively with only textual specifications and general construction plans. In these cases, requesting shop drawings from contractors is recommended, providing specific details on how the component will be manufactured or installed. Shop drawings are especially important in projects that involve custom-built components.

In some projects, it may also make sense to request material samples from the participating contractors, generally with the test results from a qualified laboratory. This is common with concrete, for example, due to how important it is for the structural integrity of a building.

Project Plan: Defining the Timeframe

Contractor bids must clearly define what will provided and at what price, but it is also necessary for them to determine timeframes. This provides a baseline against with the project owner can assess progress, and it is also useful for scheduling intermediate project payments. Completing a project successfully generally involves a detailed planning in terms of time, resources and cost.

  • Time: Many project activities follow a logical sequence. For example, roofing installation can only proceed if the underlying structure is already built, and painters must wait for the walls to be completed. A Gantt chart is the best tool for showing the sequence of project activities and their completion times, and it also allows the identification of critical activities that delay the whole project if delayed individually – noncritical activities have a slack time, and can be delayed to a degree without compromising project completion.
  • Resources: Engineering projects involve personnel and equipment, and in a well-planned project the contractor knows from the start the activities in which these resources will participate at a given time.
  • Cost: After a contractor has developed a Gantt chart and priced each activity, it is possible to estimate a cost calendar. This provides the client a clear idea on how the project budget will be used over time, allowing payments to be scheduled more effectively.

The Project Management Institute places high emphasis on project planning, since it provides a basis against which project progress can be compared in terms of scope, time and cost. When comparing bids from different contractors, verify that timeframes and resource allocation are realistic. A bid can meet all project requirements at a reasonable time, while still being lacking in terms of planning.

Conclusion

When carrying out a mechanical engineering project, avoid awarding the job blindly to the contractor with the lowest price. Keep in mind that building systems must meet a series of standards, and there is a limit to how low a specific system can be priced. Also make sure that all bidding contractors provide a detailed project plan, providing details on their expected project timeframes and resource allocation

Common searches related to HVAC Engineering in Palmer Square Chicago, Illinois.