HVAC Engineering Scottsdale Chicago, IL2018-10-06T04:19:39+00:00

What Can Our HVAC Engineers in Scottsdale Chicago Do For You?

Contact Us

If you re looking for a dependable HVAC Firms in Chicago? The one to go to is NY Engineers. Not only for HVAC Chicago but also Value Engineering and Protection Engineering in or near Scottsdale Chicago. Call (+1) (312) 767-6877

Contact Us
Value Engineering

For over 10 years a lot of construction companies throughout Lynbrook, New York already know that New York Engineers is the engineering firm to contact if you’re ooking for Mechanical Engineering in New York. What many local construction companies have not realized is the New York Engineers is also your best choice if you’re looking for HVAC Engineering services in Scottsdale Chicago, IL. If you want more information on what Scottsdale Chicago HVAC design engineers do? It is an exceptional job which inclides an extensive set of duties. An HVAC design engineer will be asked to go through a number of challenges to resolve the basic issue. This career needs special skill, professionalism, and the opportunity to deal with time cleverly.

The moment an HVAC personel is certified to function, they will likely get employed by an engineering company and begin to operate many heating, cooling, and refrigeration systems. Their task is to design new and/or replacement options in line with their client’s requirements. Each client will have a distinctive set of wishes whether or not it has to do with developing codes or individual performance anticipations. Making use of this info, the engineer sets off on a trek towards making something that’s energy-efficient, eco-friendly and perfect for the place it’s likely to be utilized in – (residential/commercial/industrial). They usually are responsible for the initial creations and managing the specific installation.

On the whole, an HVAC engineer in Scottsdale Chicago will be seen working in a design company or perhaps in a consulting team based on their many years of expertise. A great deal of engineers move into a consulting job while they get older and achieve a better idea of what’s expected of them.

Comparing HVAC Engineer vs HVAC Technician

HVAC Engineer and HVAC Technician are frequently mistaken for the other. Yet, they do have separate job functions in terms of dealing with HVAC systems. It’s important to are aware of the variance both as a customer and as a professional

An HVAC technician in Scottsdale Chicago is a more practical job, which suggests they are usually seen visiting a client’s house to look at their current system. They often times keep up with the repairs, installations, and general upkeep that is needed from time to time. Nearly all of their work is done together with your client, meaning they should learn how to connect to people properly.

With an HVAC engineer, they are accountable for designing a new HVAC system and ensuring that it meets exactly what a client wants. It has to fit just what the property owner wants whether or not it involves their setup, property, or everything else related to new system. Also, they are brought in to consult on HVAC creations to make sure things are all in line with modern standards. This is the reason they could end up spending some time in consulting assignments or at neighborhood engineering businesses. This is actually the distinction between those two career paths; HVAC Engineer Versus HVAC Technician. Even with all of this information you would like additional details about the HVAC Engineering services in Scottsdale Chicago, Illinois by New York Engineers we invite you to stop by at our Scottsdale Chicago Building Commissioning blog.

New Scottsdale Chicago HVAC Engineering Related Blog

Heating and Cooling Upgrades: Where to Start? Architectural Engineers Have This Advice

How To Become An HVAC Engineer

Space heating represents the highest energy use in many buildings. In addition, domestic hot water and space cooling systems use less energy than space heating, but they are also among the top five building systems that use the most energy. According to architectural engineers, a building can reduce its energy consumption dramatically by replacing its existing heating and cooling systems with modern and high-efficiency equipment.

However, before proceeding with a large-scale building upgrade it is necessary to define a starting point. Building upgrades are investments after all, where the property owner spends capital with the goal of achieving a permanent reduction in building ownership cost. In other words, building system upgrades only make sense from the financial standpoint if the long-term benefit outweighs the associated upfront expenses.

Is There an Upcoming Major Renovation?

Heating and cooling upgrades provide long-term benefits but can be disrupting for building operation. If a major renovation is planned in the short term, it represents an excellent chance to also improve HVAC performance.

A major renovation also provides an excellent chance to improve the building envelope, architectural engineers advise. Poor insulation and air leaks can be detected and fixed, reducing the required heating and cooling capacity after the renovation. This way, the new heating and cooling systems can be specified not only with a higher efficiency, but also with a lower capacity.

  • For example, if you replace a 100-ton air-cooled chiller consuming 1.2 kW/ton with a more efficient water-cooled unit that only uses 0.6 kW/ton, you achieve 50% energy savings.
  • However, if the new unit has a required capacity of only 80 tons thanks to building envelope improvements, energy savings are increased to 60%.

A building envelope improvement can be complemented with a lighting system upgrade. Solid-state LED lighting emits significantly less heat than incandescent, halogen or old fluorescent lighting. All this heat is subtracted from space cooling loads, providing additional energy savings beyond those achieved directly with the lighting upgrade.

Consider that a 60-watt incandescent bulb can generally be replaced with a 10-watt LED bulb, and a 4-lamp T12 fluorescent fixture (4x 34W) can generally be replaced with an integral LED fixture consuming 40-45W. The lighting heat reduction is not significant for a single fixture, but can save several tons of cooling capacity in a building with hundreds of inefficient fixtures.

Building Upgrades: Cost and Benefit

When upgrading a building it can be tempting to prioritize space heating systems, since they consume the most energy. However, it is also important to consider the energy source used by each appliance.

For a given amount of energy delivered, electricity is far more expensive than gas in major cities. Natural gas from Con Edison has a price of around 1.05 USD per therm for residential users, which translates to approximately 3.6 cents per kWh of heat, before considering appliance efficiency. On the other hand, electricity prices typically exceed 20 cents per kWh. Even if most combustion appliances are less efficient than electric appliances, the price of electricity is too high compared with that of gas. This effect is evident in electric resistance heaters, which are around four times more expensive to operate than gas heaters.

Property owners can achieve the best results by getting a professional energy audit before deciding which building upgrades to carry out. With an energy audit, property owners can get a detailed breakdown of energy efficiency measures, along with the expected cost of each. More importantly, an energy audit helps determine the return on investment for each energy efficiency measure – how many dollars will it return over its service life for each dollar spent upfront? Given the price gap between electricity and gas, upgrades that target electric system generally offer a shorter payback period and a higher ROI.

Before proceeding with any building upgrade, checking the Con Edison incentive program is highly advised. Many energy efficiency measures are eligible for attractive cash rebates, which further improves their financial performance. Consider that some rebate programs only apply during certain times of the year or have limited funding, so building upgrades should be planned accordingly.

Importance of Building Type to Architectural Engineers

Not all buildings consume energy the same way. For example, mechanical ventilation typically represents around 13% of energy use in office buildings, but only 1% in multifamily residential settings. This is a consequence of the requirements established by construction codes for each property type – natural ventilation design is mandatory in residential constructions, but designers can choose between natural and mechanical ventilation for office buildings. Domestic hot water systems experience the opposite effect as ventilation systems, representing only 2% of energy use in office buildings but 19% in multi-family residential buildings.

Differences like this are present for many building systems. For example, office occupancy is normally higher than residential occupancy during the day, which extends lighting and space cooling schedules for office buildings, and the corresponding energy expense. However, this does not mean lighting and cooling upgrades should be discarded in the residential sector: these systems represent a reduced percentage of energy consumption but are typically older than those found in office buildings, which can result in an attractive financial return.

Final Recommendations

When deciding which cooling and heating upgrades to prioritize, it is very important to select an adequate time frame for the project, and getting an energy audit to determine the cost and benefit of each measure. Ideally, deep retrofits should be scheduled along with major renovations to minimize disruption and cost. It is also important to find synergy between upgrades, for example when both lighting and space cooling are upgraded. Of course, the financial return is also a very important consideration: as a property owner you will want to prioritize measures that maximize the return on each dollar invested.

In general, energy efficiency measures that target electric systems will have a better financial performance than those targeting gas-fired systems. Nevertheless, there are exceptions to this; an energy audit of the building is the best way to tell, agree experienced architectural engineers.

searches related to HVAC Engineering in Scottsdale Chicago, Illinois.