HVAC Engineering Sleepy Hollow Chicago, IL2018-10-12T14:24:30+00:00

What Can Our HVAC Engineers in Sleepy Hollow Chicago Do For You?

Contact Us!

If you’re searching for a reliable HVAC Engineering in Chicago? Your best bet is to reach out to is New York Engineers. Not only for HVAC Firms in Chicago but also Value Engineering and Sprinkler Design Engineering throughout Sleepy Hollow Chicago. Contact us at (312) 767.6877

Contact Us!
Electrical Engineering Subjects

Since coming to market many property owners throughout Dix Hills, NY already know that New York Engineers is the engineering company to contact if you’re ooking for Value Engineering in NYC. What many local developers have not realized is the NY-Engineers.Com is also your top choice if you’re searching for HVAC Engineering services in Sleepy Hollow Chicago, Illinois. Those who need to understand more about what Sleepy Hollow Chicago HVAC design engineers do? This is an exclusive job which inclides a detailed set of obligations. An HVAC design personel will be asked to go through a variety of concundrums to eliminate the actual issue. This career calls for distinct talent, professionalism, and the capability to control time wisely.

As soon as an HVAC contractor is certified to operate, they are going to join up with an engineering company and start to functions on various cooling, heating and refrigeration systems. Their responsibility is always to design new and/or replacement options depending on their customer’s requests. Each customer is going to have an original set of wants whether it concerns building codes or personal performance anticipations. Making use of this data, the engineer goes on a trek towards creating something that is energy-efficient, eco-friendly and suitable for the place it might be used in – (residential/industrial/commercial). They usually are in charge of the first drawings and overseeing the actual installation.

Generally speaking, an HVAC design engineer in Sleepy Hollow Chicago is going to be seen working with a design company or even in a consulting firm according to their many years of expertise. Most engineers shift into a consulting job since they become older and acquire a better comprehension of what is required of them.

Comparing HVAC Engineer Versus HVAC Technician

HVAC Technician and HVAC Engineer are usually mistaken for the other. Nevertheless, they have got separate tasks in relation to running HVAC systems. It is crucial that you are aware of the difference both as a customer as well as a professional

An HVAC technician in Sleepy Hollow Chicago is a more hands-on job, meaning they are generally seen going to a customer’s property to check out their present system. They frequently keep up with the repairs, installations, and over-all keep which is needed from time to time. Nearly all of their work is done alongside your client, meaning they must understand how to communicate with people in the right way.

Having an HVAC engineer, they are accountable for creating a new HVAC system and ensuring that it meets just what a customer is after. It must fit what the property owner needs whether it involves their setup, property, or anything else of new system. They are also introduced to refer to HVAC creations to make certain all things are in step with modern standards. For this reason they can end up spending some time in consulting firms or at neighborhood engineering businesses. That is the difference between these vocation choices; HVAC Technician vs HVAC Engineer. There’s only so much you can save this page if you would like more information about the HVAC Engineering services in Sleepy Hollow Chicago, Illinois by New York Engineers we invite you to take a look at our blog.

New Sleepy Hollow Chicago HVAC Engineering Related Post

How MEP Engineers Explain Radiant Floor Heating and Its Benefits

Fire Protection Engineering Jobs

Radiant floor heating consists of delivering heat through the existing floor surface, as opposed to using air ducts or baseboard heaters. The upfront cost of radiant floor heating is generally higher than that of other systems, since it is necessary for MEP engineers to install hot water piping or electrical wiring under the floor. However, this is compensated by improved comfort and energy efficiency.

According to the US Department of Energy, space heating is the highest energy expense in American households and represents around 45% of energy bills on average. Therefore, any improvements to heating performance and efficiency can yield an attractive return on investment.

How MEP Engineers Classify Radiant Floor Heating Systems

Most radiant floor heating systems are either hydronic, which rely on hot water piping; or electric, which use wiring or conductive mats under the floor. Air-heated installations also exist, but they suffer from a very low efficiency without offering any significant advantages. Radiant floor heating systems can also be classified based on their construction:

  • In wet installations, hydronic piping or electrical wiring is embedded directly in a concrete floor, or any other solid mass than can hold and emit large amounts of heat. It is important to note that “wet installation” is not a literal term: the hot water stays inside hydronic piping, releasing only its heat.
  • In dry installations, on the other hand, piping and cables are installed in an empty space between floor layers or below the floor, but are not embedded.

Deciding which heat source and system construction to use is a matter of cost and benefit that should be analyzed by MEP engineers.

For example, an electric radiant heating system of dry construction will generally be the cheapest but least efficient option. On the other hand, an embedded hydronic system is likely to have the highest upfront cost but also the lowest operating cost.

Energy Sources for Radiant Floor Heating

The heat sources available depend on the type of heating system. Hydronic radiant heating is the most versatile option because any energy source capable of heating water is viable; the system can run with electricity, natural gas, oil, propane, biomass or solar radiation. Electric radiant heating systems are much more limited, since their design only allows resistance-based heating.

Hydronic Radiant Floor Heating

As previously stated, the main advantages of this configuration are versatility and energy efficiency. Homeowners with hydronic radiant heating can choose from a wide variety of energy sources:

  • Boilers: These can be fired by natural gas, propane, oil or biomass, allowing their owners to choose the cheapest option at their location. Electric resistance boilers can also be used, but their high operating cost negates the efficiency benefit of radiant heating.
  • Heat Pumps: They are a cost-effective alternative to electric resistance boilers. Although they also run with electricity, but can match the output of an equivalent resistance heater with just a fraction of the energy input. In many cases, heat pumps can compete with gas boilers due to their superior efficiency.
  • Solar Collectors: Water heated by a solar collector can be used directly in a hydronic radiant heating system. If the available solar radiation is not enough to meet the heating load completely, the system can be complemented with a boiler or heat pump. Solar collectors can achieve excellent results when hydronic piping is embedded in a concrete slab, since it essentially allows energy from the sun to be stored thermally for nighttime heating.

An engineering consultant or design firm can help you determine the best option for your home, depending on your needs and site conditions. For instance, solar collectors are not viable if your rooftop has shading issues, and gas boilers can be very expensive to install if your property lacks a chimney or service entrance of enough capacity.

Another advantage of hydronic heating systems is that a central heating unit can be used for both water and space heating, consolidating two building systems and reducing their total cost.

Electric Radiant Floor Heating

This system configuration is characterized by a simple and cheap installation, but also a very high operating cost. No central boiler or heating unit is required: electric current is carried by wiring, and heat is generated locally. This type of system can be cost-effective when electricity rates are low and heating is used for only a few months each year, but this is not always the case.

Some electric radiant heating systems use conductive mats instead of wiring. The basic operating principle is the same, but heat distribution is improved.

Comfort and Health Advantages of Radiant Floor Heating

Radiant floor heating systems offer comfort and health benefits that apply regardless of the energy source and system construction.

Improved Comfort

Radiant heating systems operate without blowers and ducts, creating a uniform heat distribution throughout indoor spaces. Heat is radiated from the floor, and then distributed by natural air convection. This eliminates some issues that are common in forced-air systems and cause discomfort:

  • Uneven heat distribution
  • Noisy ducts
  • Draftiness

Health and Air Quality Benefits

Another advantage of radiant floor heating systems is that they can’t distribute allergens, volatile organic compounds (VOCs) or airborne germs because there is no forced air circulation. In addition, the ventilation system becomes independent from heating and can be designed specifically for indoor air quality.

Disadvantages of Radiant Floor Heating

As in all engineering decisions, radiant floor heating is not free from limitations: it generally comes with a higher price tag, and responds more slowly than other types of heating systems.

The cost of radiant floor heating can be very high in existing buildings, since it is necessary to embed a new system within the existing floor. The installation is even more expensive if an embedded system will be used, since it is necessary to pour a new concrete slab. Radiant floor heating is much more affordable in new construction, where floor installation costs are already part of the project baseline and it is only necessary to add one extra element.

Another disadvantage of radiant floor heating systems is that they take longer to heat an indoor space, compared with forced-air systems. However, this can be easily compensated with automation: smart thermostat can be configured to preheat rooms when the lowest hourly electricity rates are being applied, saving energy in the process!

General Recommendations for Radiant Floor Heating Systems

The choice of construction materials is very important when dealing with radiant floor heating. The Department of Energy recommends the use of ceramic tiles instead of wood, since ceramic can hold and emit heat more effectively. On the other hand, wood is essentially a form of insulation and it reduces system efficiency. Another disadvantage of wood floors is that they can crack in response to temperature changes.

Another recommendation offered by MEP engineers, which applies not only for radiant floor heating but for any HVAC upgrade, is to improve the building envelope before sizing the new equipment. This way, heating and cooling loads are reduced and the new equipment can be sized smaller, increasing the energy-saving potential.

Common searches related to HVAC Engineering Sleepy Hollow Chicago, IL.