HVAC Engineering West DePaul Chicago, IL2018-10-30T19:12:41+00:00

What Can Our HVAC Engineers in West DePaul Chicago Do For You?

Contact Us!

When you re looking for a reliable HVAC Engineering in Chicago? Your best bet is to call is New York Engineers. Not only for HVAC Firms in Chicago but also Mechanical Engineering and Sprinkler System Engineering throughout West DePaul Chicago. Contact us at (312) 767.6877

Contact Us!
Mechanical Engineers

Over the last decade a great number of building owners throughout Lynbrook, New York already know that NY Engineers is the engineering firm to contact when you are searching for Value Engineering in New York. What many local real estate investors have not realized is the NY Engineers is also your top choice if you’re searching for HVAC Engineering services in West DePaul Chicago, Illinois. Those who need more information on what West DePaul Chicago HVAC design engineers do? This really is an exclusive profession with an a detailed list of duties. An HVAC design contractor will have to go through several problems to settle the original issue. This career needs special skill, professionalism, and the cabability to manage time prudently.

After an HVAC contractor is licensed to work, they will join up with an engineering firm and start to work on several heating, cooling, and refrigeration systems. Their function is usually to design new and/or replacement options based upon their customer’s requests. Every customer is going to have a distinctive set of wants whether it concerns constructing codes or individual performance expectations. Making use of this data, the engineer sets off on a journey towards building something that’s energy-efficient, eco-friendly and perfect for the place it’s going to be utilized in – (residential/industrial/commercial). They usually are accountable for the original drawings and managing the specific installation.

In general, an HVAC engineer in West DePaul Chicago will be seen working with a design company or even in a consulting team depending on their many years of skill. Many engineers move into a consulting job since they mature and achieve a better knowledge of what is required of them.

Comparison: HVAC Engineer vs HVAC Technician

HVAC Technician and HVAC Engineer are often confused with the other. However, they do have separate tasks in terms of running HVAC systems. It is important to are aware of the dis-similarity both as being a client and as a professional

An HVAC technician in West DePaul Chicago is a more active job, which suggests they are usually seen heading to a customer’s building to inspect their present system. They frequently keep up with the repairs, installations, and overall care which is required from time to time. Nearly all of their work is done together with the buyer, which implies they need to understand how to communicate with people in the right way.

By having an HVAC engineer, they are responsible for creating a new HVAC system and making sure it fits just what a customer is after. It needs to fit precisely what the home owner needs whether or not it involves their setup, property, or everything else associated with new system. They are also brought in to check on HVAC designs to be certain things are all in line with the latest standards. This is the reason they may find themselves passing time in consulting tasks or at neighborhood engineering firms. That is the distinction between these two occupation; HVAC Technician Versus HVAC Engineer. There is only so much you can save this page if you would like additional information about the HVAC Engineering services in West DePaul Chicago, Illinois by NY-Engineers.Com we invite you to stop by at our West DePaul Chicago Electrical Engineering blog.

West DePaul Chicago HVAC Engineering Related Article

How MEP Engineers Explain Radiant Floor Heating and Its Benefits

MEP Engineering Courses

Radiant floor heating consists of delivering heat through the existing floor surface, as opposed to using air ducts or baseboard heaters. The upfront cost of radiant floor heating is generally higher than that of other systems, since it is necessary for MEP engineers to install hot water piping or electrical wiring under the floor. However, this is compensated by improved comfort and energy efficiency.

According to the US Department of Energy, space heating is the highest energy expense in American households and represents around 45% of energy bills on average. Therefore, any improvements to heating performance and efficiency can yield an attractive return on investment.

How MEP Engineers Classify Radiant Floor Heating Systems

Most radiant floor heating systems are either hydronic, which rely on hot water piping; or electric, which use wiring or conductive mats under the floor. Air-heated installations also exist, but they suffer from a very low efficiency without offering any significant advantages. Radiant floor heating systems can also be classified based on their construction:

  • In wet installations, hydronic piping or electrical wiring is embedded directly in a concrete floor, or any other solid mass than can hold and emit large amounts of heat. It is important to note that “wet installation” is not a literal term: the hot water stays inside hydronic piping, releasing only its heat.
  • In dry installations, on the other hand, piping and cables are installed in an empty space between floor layers or below the floor, but are not embedded.

Deciding which heat source and system construction to use is a matter of cost and benefit that should be analyzed by MEP engineers.

For example, an electric radiant heating system of dry construction will generally be the cheapest but least efficient option. On the other hand, an embedded hydronic system is likely to have the highest upfront cost but also the lowest operating cost.

Energy Sources for Radiant Floor Heating

The heat sources available depend on the type of heating system. Hydronic radiant heating is the most versatile option because any energy source capable of heating water is viable; the system can run with electricity, natural gas, oil, propane, biomass or solar radiation. Electric radiant heating systems are much more limited, since their design only allows resistance-based heating.

Hydronic Radiant Floor Heating

As previously stated, the main advantages of this configuration are versatility and energy efficiency. Homeowners with hydronic radiant heating can choose from a wide variety of energy sources:

  • Boilers: These can be fired by natural gas, propane, oil or biomass, allowing their owners to choose the cheapest option at their location. Electric resistance boilers can also be used, but their high operating cost negates the efficiency benefit of radiant heating.
  • Heat Pumps: They are a cost-effective alternative to electric resistance boilers. Although they also run with electricity, but can match the output of an equivalent resistance heater with just a fraction of the energy input. In many cases, heat pumps can compete with gas boilers due to their superior efficiency.
  • Solar Collectors: Water heated by a solar collector can be used directly in a hydronic radiant heating system. If the available solar radiation is not enough to meet the heating load completely, the system can be complemented with a boiler or heat pump. Solar collectors can achieve excellent results when hydronic piping is embedded in a concrete slab, since it essentially allows energy from the sun to be stored thermally for nighttime heating.

An engineering consultant or design firm can help you determine the best option for your home, depending on your needs and site conditions. For instance, solar collectors are not viable if your rooftop has shading issues, and gas boilers can be very expensive to install if your property lacks a chimney or service entrance of enough capacity.

Another advantage of hydronic heating systems is that a central heating unit can be used for both water and space heating, consolidating two building systems and reducing their total cost.

Electric Radiant Floor Heating

This system configuration is characterized by a simple and cheap installation, but also a very high operating cost. No central boiler or heating unit is required: electric current is carried by wiring, and heat is generated locally. This type of system can be cost-effective when electricity rates are low and heating is used for only a few months each year, but this is not always the case.

Some electric radiant heating systems use conductive mats instead of wiring. The basic operating principle is the same, but heat distribution is improved.

Comfort and Health Advantages of Radiant Floor Heating

Radiant floor heating systems offer comfort and health benefits that apply regardless of the energy source and system construction.

Improved Comfort

Radiant heating systems operate without blowers and ducts, creating a uniform heat distribution throughout indoor spaces. Heat is radiated from the floor, and then distributed by natural air convection. This eliminates some issues that are common in forced-air systems and cause discomfort:

  • Uneven heat distribution
  • Noisy ducts
  • Draftiness

Health and Air Quality Benefits

Another advantage of radiant floor heating systems is that they can’t distribute allergens, volatile organic compounds (VOCs) or airborne germs because there is no forced air circulation. In addition, the ventilation system becomes independent from heating and can be designed specifically for indoor air quality.

Disadvantages of Radiant Floor Heating

As in all engineering decisions, radiant floor heating is not free from limitations: it generally comes with a higher price tag, and responds more slowly than other types of heating systems.

The cost of radiant floor heating can be very high in existing buildings, since it is necessary to embed a new system within the existing floor. The installation is even more expensive if an embedded system will be used, since it is necessary to pour a new concrete slab. Radiant floor heating is much more affordable in new construction, where floor installation costs are already part of the project baseline and it is only necessary to add one extra element.

Another disadvantage of radiant floor heating systems is that they take longer to heat an indoor space, compared with forced-air systems. However, this can be easily compensated with automation: smart thermostat can be configured to preheat rooms when the lowest hourly electricity rates are being applied, saving energy in the process!

General Recommendations for Radiant Floor Heating Systems

The choice of construction materials is very important when dealing with radiant floor heating. The Department of Energy recommends the use of ceramic tiles instead of wood, since ceramic can hold and emit heat more effectively. On the other hand, wood is essentially a form of insulation and it reduces system efficiency. Another disadvantage of wood floors is that they can crack in response to temperature changes.

Another recommendation offered by MEP engineers, which applies not only for radiant floor heating but for any HVAC upgrade, is to improve the building envelope before sizing the new equipment. This way, heating and cooling loads are reduced and the new equipment can be sized smaller, increasing the energy-saving potential.

Common searches related to HVAC Engineering in West DePaul Chicago, Illinois.