HVAC Kilbourn Park Chicago2018-12-06T07:31:01+00:00

HVAC Kilbourn Park Chicago | Expert Energy Efficient System Designs

Architectural Engineers
Contact Us

Don’t be fooled by the name New York Engineers is the top choice if you are searching for Full Service Heating Cooling Air Conditioning Furnace (HVAC) Engineering Firm in Chicago Illinois. We are not only an HVAC Chicago but also a leading provider of MEP Engineering Engineering services in or near Kilbourn Park Chicago. Contact us at 312 767-6877

Contact Us

In recent times A lot of individuals have been stopping by the NY-Engineers.Com website looking for Mechanical Engineering near Chicago. That is due because of the following we have built in this types of projects. With that said, a lot of building managers from Lombard to Springfield, Illinois, don’t know that New York Engineers is also the ideal choice for anyone in search of HVAC Chicago!

The pursuit of power efficient buildings involves energy-efficient HVAC system design. This may include systems for architectural enclosure, domestic water heating, lighting, HVAC, and vertical transportation. The loads for the HVAC systems may come primarily from 5 different bases including lighting (cooling), your building envelope (cooling and heating), ventilation (cooling and heating), equipment for program use (cooling) and occupancy (cooling).
The ventilation load is a purpose of either the devices required so as to introduce it right into a space and control contaminant concentration or the amount of people that can use the place. In the vast majority of climates inside the eastern and southwestern parts of the US, to reduce outside air-flow will save energy whenever the outer air is either humid and warm or very cold.
Controlling the ventilation rate is going to be dependant on occupancy which is referred to as a type of demand control ventilation. This can be a everyday sort of energy conservation plan that is used for rooms with irregular or crowded occupancy. Having heating and cooling loads reduced to a minimum can be achieved by using a high performance building envelope, occupancy sensors, and performance lighting that apply daylight response of lighting controls.

Chicago HVAC Engineering services versus HVAC Technicians

If you have ever considered the difference between a HVAC Engineers vs HVAC Technicians, then read on:

HVAC engineers will be the individuals who supervise installing of air cooling systems for both residential and commercial buildings. They spend a lot of their work in offices doing higher level organization and planning of installations nonetheless they do also stop by job sites every so often.

But, HVAC technicians often do a lot of the hands-on work  that deals with maintenance and repair. A HVAC tech may work with or for an engineer to accomplish a number of the installation task, specifically for smaller jobs. On the whole HVAC technicians do a lot more travel and may even spend considerable time changing filters, identifying leaks, doing recharges or decommissioning old and outdated systems that use old refrigerants.

HVAC engineers may have the chance to make more decisions about systems that are used, and so they are definitely the individuals who would offer assistance with probably the most sensible refrigerants and which systems would work best with a bigger building. In the industry, there exists some competition between ‘the suits’ and ‘the ones that will get their hands dirty’, but the two jobs require an excellent familiarity with how air-con is proven to work. Nowadays huge crowds have been getting to our sites looking for things like HVAC Parts Chicago. With that said, the focus of our firm is to become the number one choice for anyone looking for a HVAC Firm near Chicago and or any of our other services including Construction Engineering Engineering services. Furthermore everybody searching for additional info about our Heating & Air Conditioning (HVAC) Engineering Firm in Chicago Illinois visits at our Value Engineers blog.

Post Related to HVAC Contractor near Chicago

MEP Engineering Applications in Plumbing System Design

What Do Architectural Engineers Do

MEP engineering services encompass mechanical, electrical, and plumbing installation for a high-rise building. Just as every building requires electric wires and air conditioning units to supply power and regulate the temperature, a plumbing system is also an integral part to any high-rise building because it gives occupants or office workers access to clean water and sanitary sewage disposal, which are essential parts in our daily lives. Understandably, planning and installing a plumbing system can be a daunting task, especially if your employers also demand an environmental-friendly and cost-effective system. It is always useful to double check everything before you start commencing your project. Here are the four crucial things to consider when you design a plumbing system.

The Building Type

The type and the function of your building is the most important factor in deciding which kind of plumbing design your MEP engineering project needs, or whether you would require special equipment like sump pumps or interceptors. As an example, a senior care facility requires an average-yet-constant volume of hot water for showering and cooking. A central boiler might be a great choice as it can guarantee quick and steady delivery of hot water. Meanwhile, a restaurant uses a massive volume of hot water in a short period of time for their cooking activities so they will need many water heaters to allow hot water to recover more quickly.

Linking Up With the Public Systems

Plumbing systems in and MEP engineering project are not meant to be a closed circuit. They have to be linked up with public sanitation and water supply systems in order to be truly effective. Usually, MEP engineers extend their design no more than five feet outside the building, so you should consider this fact to find the perfect link-up spot for the building’s systems and public ones.

The Size of the Incoming Water Pipe

The incoming water pipe is the pipe that brings water from the public system to your building. As it serves to bring water from a water station, it is important that you use the right size. If it is too big in comparison with the street pipe, water supply from the street will dwindle and will not be enough to support the whole building.

The Size of the Sewage Pipe

Just like the incoming water pipe, the size of the outgoing sewage pipe is also important to your plumbing project. If the outgoing pipe is much smaller than the connected street pipe, then the building’s sewage could be sent back up, thus causing blockage and unpleasant odors.

MEP Engineering Improves Plumbing Systems

Plumbing is among one of the hardest phases of MEP engineering.  It is always a good idea to keep a checklist of the things that you must take into account or else errors will happen and the project might fail. If you are looking for professional MEP experts on plumbing, you have come to the right place.

With years of experience and a portfolio which includes an impressive range of projects, we at New York Engineers can confidently offer you high-quality MEP engineering services with the most reasonable prices. If you are interested, contact us to obtain more information.

Top Searches Related to HVAC Firm in Chicago