HVAC Mayfair Chicago2018-11-28T04:37:04+00:00

HVAC Mayfair Chicago | Expert Energy Efficient System Designs

Electrical Engineering Degree
Contact Us

Don’t be fooled by our NY Engineers is your best option if you are looking for Full Service Heating & Air Conditioning (HVAC) Engineering Firm in Chicago Illinois. We are not only an HVAC Contractor in Chicago but also a leading provider of MEP Engineering Engineering services throughout Mayfair Chicago. Call us at (+1) (312) 767.6877

Contact Us

Lately huge crowds have been taking a look at the New York Engineers site looking for Mechanical Engineering near the Chicago area. This is due primarily due to the following we have built in this types of projects. With that said, many general contractors from Brookfield to Champaign, do not know that NY Engineers is also a top contender for anyone looking for HVAC Chicago, IL.

The pursuit of energy-efficient buildings involves energy-efficient HVAC system design. This can include systems for domestic water heating, architectural enclosure, HVAC, lighting, and vertical transportation. The loads for your HVAC systems can come primarily from 5 different sources including lighting (cooling), the construction envelope (cooling and heating), ventilation (cooling and heating), equipment for program use (cooling) and occupancy (cooling).
The ventilation load will certainly be a function of either the machines needed to be able to introduce it in a space and control contaminant concentration or the amount of individuals who will be in the space. In nearly all climates within the southwestern and eastern areas of the usa, to lower outside air-flow helps save energy whenever the exterior air is either warm and humid or very cold.
Manipulating the ventilation rate will probably be dependant upon occupancy which is referred to as a variety of demand control ventilation. It is a common type of energy conservation plan that is utilized for spaces with irregular or crowded occupancy. Having cooling and heating loads dropped to a minimum can be accomplished by using a high performance building envelope, occupancy sensors, and high performance lighting that apply daylight response of lighting controls.

Chicago HVAC Engineering services versus HVAC Technicians

When you have ever considered the distinction between a HVAC Technician vs HVAC Engineers, then continue reading:

Chicago HVAC engineers are the people that watch over the installation of air conditioning systems both for commercial and residential buildings. They spend plenty of their day in offices doing advanced level organization and planning of installations nevertheless they do also see job sites every once in awhile.

In contrast, HVAC technicians in Chicago usually do a lot of the hands-on work  that deals with repair and maintenance. A HVAC technician may deal with an engineer to do some of the installation work, specifically on smaller jobs. In general HVAC techs do much more travel and could spend time and effort changing filters, identifying leaks, doing recharges or getting rid of old and outdated systems that utilize old refrigerants.

HVAC engineers could have a chance to make more decisions about systems that are employed, plus they are definitely the individuals who would offer advice about by far the most sensible refrigerants and which systems would work best with a bigger building. In the trade, there is some competition between ‘the suits’ and ‘the ones which get their hands dirty’, but the two jobs do require an excellent familiarity with how air cooling really works. As of late a lot of individuals have been visiting the New York Engineers site looking for things like HVAC Conference 2019 Chicago. With that said, the goal of our firm is to be the number one choice for anyone looking for a HVAC Company in or near Chicago and or any of our other services including Value Engineering Engineering services. Furthermore everybody searching for more info about our Heating Cooling Air Conditioning Furnace (HVAC) Engineering Firm in Chicago Illinois stops by at our Engineers Reports blog

Latest Article Related to HVAC Chicago

What Should Electrical Engineers Connect to an Emergency Generator in a Commercial Building?

Architectural Engineering Colleges

Commercial buildings are characterized by the continuous presence of a large number of occupants, which means safety should be among the top priorities for the companies that own them and the electrical engineers involved in their maintenance. When addressing the topic of backup generators, there are two main categories: emergency loads and standby loads.

Emergency loads include the equipment and building systems that would create life-threatening conditions if they stop operating. For example, exit signs and staircase lighting are always considered emergency loads, since evacuating a building without them is very difficult.

Standby loads may cause inconvenience or discomfort if they stop operating, but do not create risks like those involved if an emergency load is left without power. Keep in mind, however, that backup power for some standby loads is mandatory, especially loads that simplify troubleshooting during an electric service interruption, or if they are useful for rescue operations during an emergency.

Optional Standby Power: Additional Requirements for Electrical Engineers

Not all loads are considered optional standby loads, which means the building code does not require a backup power system for them, but it can be installed anyway if considered appropriate by the owner and electrical engineers designing the system. It is important to note, however, that the following loads must be added to any optional standby loads when sizing the generator:

  • Fire alarm systems
  • Emergency lighting
  • At least one elevator serving all floors, in buildings with occupied floors more than 75 ft above the lowest fire truck access

Although these loads are normally covered by emergency or mandatory standby power systems, the code requires them to be counted for any optional standby system as a failsafe measure. In addition, the code allows the fuel supply to be shared among emergency and optional standby generators. Complementary equipment that is needed for generator operation can also be shared among emergency and optional standby units.

When Is Optional Standby Power Recommended?

There are many loads in commercial buildings that are not legally required to have standby power. When determining what to connect to an optional standby power system, the best recommendation is working closely with the property owner and using common sense.

Refrigeration Systems

When refrigeration systems stop operating, it is only a matter of time before the products and supplies they contain start to degrade. This may not be a critical issue in an office building that only has a few small refrigerators, but can have severe consequences in a restaurant or hospital, where large amount of food or medical supplies require low-temperature storage.

In these cases, even if a standby power system is not legally required, it is in the best interest of the company to install it. In both cases, omitting the standby power system can have human health consequences. In addition, even if spoiled food or medical supplies are discarded, it represents a financial loss for the company.

Water Pumping Systems

The water supply is a key building system, especially when kitchens and bathrooms are present. Therefore, optional standby power is recommended if the building relies on water booster pump; otherwise, an electric service interruption will cut the water supply for upper floors.

Networking Infrastructure

Information technologies are key for modern business operations, and they generally represent a small energy expense compared with equipment such as water heaters and HVAC units. Lack of connectivity can disrupt business operations severely, and in hospitals it can even reduce the medical staff’s ability to serve patients.

Air Conditioning

Providing optional standby power for air conditioning systems can be expensive, since the required generator capacity is increased significantly. However, there are many cases where the loss of air conditioning can be very disruptive for commercial operations, and the extra cost may be justifiable from the business standpoint. For example, the loss of air conditioning can ward off potential customers in restaurants and retail stores.

In conjunction with the owner of the establishment, electrical engineers must consider all of the elements listed above – perhaps even more, if the situation calls for it.

Searches Related to HVAC Companies in or near Chicago