HVAC West Pullman Chicago2018-12-05T11:45:43+00:00

HVAC West Pullman Chicago | Expert Power Efficient System Designs

MEP Firm Definition
Contact Us

Don’t be misled by the name NY Engineers is your best bet if you are looking for Full Service Heating and Air Conditioning (HVAC) Engineering Firm in Chicago Illinois. We’re not only an HVAC Contractor near Chicago but also a leading provider of Architectural Engineering Engineering services throughout West Pullman Chicago. Call 312 767-6877

Contact Us

Recently huge crowds have been browsing the NY-Engineers.Com site searching for Value Engineering in the Chicago area. That is due because of the following we have develop in this kind of work. However, many building owners from Glencoe to Champaign, IL, don’t know that NY Engineers is also the ideal choice for anyone searching for HVAC Firm in or near Chicago, IL!

The pursuit of energy efficient buildings involves energy-efficient HVAC system design. This will include systems for lighting, architectural enclosure, domestic water heating, HVAC, and vertical transportation. The loads for that HVAC systems may come primarily from five different sources including lighting (cooling), your building envelope (cooling and heating), ventilation (cooling and heating), equipment for program use (cooling) and occupancy (cooling).
The ventilation load is a purpose of either the mechanisms needed to be able to introduce it in to a space and control contaminant concentration or the amount of people who will fill the area. In the majority of climates from the southwestern and eastern areas of the united states, to lower outside air flow can save energy whenever the

outside air is either warm and humid or very cold.
Governing the ventilation rate is going to be based on occupancy which is referred to as a form of demand control ventilation. This is a common type of energy conservation approach that is utilized for spaces with irregular or dense occupancy. Having heating and cooling loads reduced to a minimum can be accomplished by utilizing an increased performance building envelope, occupancy sensors, and performance lighting that uses daylight response of lighting controls.

Chicago HVAC Engineering services versus HVAC Techs

When you’ve ever discussed the distinction between a HVAC Technician versus HVAC Technicians, then keep reading:

Chicago HVAC engineers are definitely the folks that oversee setting up of air-con systems both for commercial and residential buildings. They spend plenty of their work in offices doing higher level organization and preparation of installations but they do also stop by job sites from time to time.

In contrast, HVAC technicians in Chicago have a tendency to do a lot of hands-on work  that deals with maintenance and repair. A HVAC technician may work with or for an engineer to do several of the installation work, particularly for smaller jobs. In general HVAC techs do considerably more travel and might spend a lot of time identifying leaks, changing filters, doing recharges or getting rid of old and outdated systems which use old refrigerants.

HVAC engineers could possibly have the chance to make more decisions about systems that are employed, plus they are definitely the people who would offer assistance with by far the most sensible refrigerants and which systems would best suit a larger building. In the industry, there exists some challenge between ‘the suits’ and ‘the ones that get their hands dirty’, but the two jobs require an effective expertise in how air cooling is proven to work. Nowadays a lot of Internet users have been browsing our sites searching for HVAC Chicago Illinois. Nevertheless, the goal of our organization is to be the top option for anyone seeking a HVAC Company near Chicago and or any of our other services including Protection Engineering services. We ask that everybody looking for additional information about our Heating & Air Conditioning (HVAC) Engineering Firm in Chicago Illinois takes a look at our Construction Administration blog!

New Post Related to HVAC Chicago

The Mechanical Engineers Guide to LEED Certifications and Credentials

Construction Engineers

LEED stands for Leadership in Energy and Environmental Design, and it is the most widely used certification system for green buildings by mechanical engineers throughout the world. According to the US Green Building Council, developer of LEED, over 1.85 million square feet of built environment are certified daily.

LEED offers various certification frameworks, adapting to the needs of all types of projects. The certification is based on accumulating points across various sustainability categories, and there are four certification levels based on the score obtained: Certified, Silver, Gold and Platinum.

The latest version of the program is LEED v4 and it was launched in November 2013, at the Greenbuild International Conference and Expo in Philadelphia. The main reason for launching LEED v4 was to update the program to reflect new trends in green construction; for example, buildings can now earn points for deploying demand-side response and other smart grid technologies, categories that were not included in previous versions.

How the LEED Certification Adapts to the Type of Project

The best approach to make a building greener changes depending on its characteristics. For example, new constructions offer more flexibility than existing buildings, and measures that are valid for high-rise commercial buildings may not be suitable in single-family households. Since construction projects are so different in terms of their needs, LEED offers five different certification pathways, each designed with for a different market segment.

LEED for Building Design and Construction (BD+C)

This LEED framework is designed for new constructions and buildings undergoing major renovations, where there are less constraints for implementing sustainability measures. Green construction tends to offer the highest financial return in new buildings, since there is already a baseline cost and upgrades are assessed based on how much they raise the budget, not their full price.

One of the most significant areas of opportunity in new buildings and those undergoing major renovations is the building envelope. If it offers an effective barrier against heat transfer and air leaks, the operating cost and installed capacity of HVAC systems can be reduced, offering savings upfront and throughout the entire life cycle of the facility.

LEED for Building Operations and Maintenance (O+M)

Demolishing an existing facility to build it again from scratch with sustainability measures defeats the purpose of green engineering: the waste generated in the process tends to offset any benefits offered by the new building. It may take several decades for a new building to make up for the impact of a full reconstruction, even if mechanical engineers deploy the latest green construction measures in the new facility.

The LEED O+M framework addresses existing buildings, where the flexibility to deploy green measures is reduced compared with the case of major renovations and new constructions.

LEED for Interior Design and Construction (ID+C)

Companies don’t always own the facility where they have their operations: commercial and industrial spaces are often leased. LEED ID+C is designed for firms with limited control over building conditions, who may be unable to deploy sustainability measures for all building systems.

LEED for Homes

This LEED framework focuses on the residential sector, and it can be applied for projects ranging from single-family dwellings to buildings up to eight stories high. A residential LEED certification can be a very powerful marketing tool, drawing the attention of homeowners who want to reduce their utility bills while helping preserve the environment.

LEED for homes gives special attention to indoor air quality, ensuring residential spaces are built with consideration to health and the general well-being of occupants.

LEED for Neighborhood Development (ND)

Rather than focusing on specific buildings, LEED ND offers an approach to develop green neighborhoods, and there are two certification options to meet the needs of projects in different stages of development:

  • Plan Certification applies for projects in the planning and design phase.
  • Built Project Certification is for projects that are almost completed, or those built within the latest three years.

LEED Credentials for Green Building Professionals

To achieve LEED certification for a building, you need the services of professionals who are well versed in the topic. However, LEED certifications are not limited to projects: professionals can also be accredited in green building practices.

LEED Green Associate

This is the entry-level LEED credential, and it guarantees that the professional who holds it has updated and documented knowledge of green building principles and best practices. The fee is $100 for students, $200 for USGBC members and $250 for non-members.

LEED AP – Accredited Professional Holders of this credential have advanced knowledge in green construction and are specialized in a specific LEED rating system. This means there are five versions of the LEED AP credential, corresponding to the rating systems: BD+C, O+M, ID+C, ND and HOMES.

The LEED AP exam has a fee of $250 for members ($350 non-members) and can be taken along with the Green Associate exam for $400 ($550 non-members).

LEED Fellow

LEED Fellows are APs who have an exceptional track record in the green building field. The recognition is awarded after the candidate is evaluated based on five aspects of the green building industry:

  • Technical Proficiency
  • Education and Mentoring
  • Leadership
  • Commitment and Service
  • Advocacy

To become a LEED Fellow, an AP must have made significant contributions in Technical Proficiency and at least three of the other four areas. To be eligible, the AP must have held his or her credential for eight years or more, and must have at least ten years of experience in the field.

How Mechanical Engineers Obtain LEED Certification for a Commercial Building

The process to get a LEED certification for a building includes four main steps:

  1. Registration
  2. Application
  3. Review
  4. Certification

Keep in mind that the LEED certification process has a registration fee and a review fee, and they are paid regardless of the result. Therefore, make sure you have a LEED-eligible building before proceeding; the consulting services of a LEED Accredited Professional will be of great help.

Registration

Before applying, make sure you select the LEED rating system that best matches your project. When more than one rating system is applicable, the USGBC provides the following guidelines:

  • If a LEED rating system is appropriate for more than 60% of the project’s floor area, it is recommended.
  • On the other hand, if the rating system is appropriate for less than 40% of the project’s floor area, the building has a low chance of getting certified. The best option in this case is to choose another rating system.
  • For any value between 40% and 60%, the project team must assess the situation and take the best decision.

Once you are ready to proceed, you can visit LEED Online, where the building owner submits key project information, pays the registration fee, and signs the certification agreement.

Application

The application phase consists on gathering and submitting the required information for review by GBCI. The procedure is as follows:

  • Select the LEED credits you will pursue, and assign them to project team members.
  • Gather information and carry out the respective analysis for each credit.
  • Prepare documentation that proves your building meets the LEED minimum requirements and the selected credits.

The completed certification application can be submitted entirely through LEED Online. After the building owner pays the certification review fee, GBCI initiates the reviewing process. As with all technical documentation, clarity and conciseness are important to communicate information effectively, and they increase the chances of a successful application.

Review

Regardless of the LEED rating system and credits you selected, the review process stays the same:

  • Preliminary review: GBCI checks the submitted information for completeness and compliance, in accordance with the LEED credits selected. GBCI responds within 20 to 25 business days, stating which credits are anticipated to be awarded and which will require extra information or be denied. The project owner can accept the preliminary review as final, or can attempt extra credits and submit additional information.
  • Final review: GBCI reviews the application again, evaluating compliance for any new credits attempted by the project owner, and re-evaluating the awarded credits considering the new information. The process is completed within 20 to 25 business days.
  • Appeal review: This review only proceeds if the project owner is not satisfied with the final review. For the appeal review, new credits can be attempted and additional information is submitted. There is no limit to the number of appeal reviews, but each of them has an extra cost beyond the normal certification review fee.

GBCI offers the option of an expedited review, which is carried out in 10-12 days per phase. It comes with an additional cost and subject to staff availability.

Certification

The building will then be assigned one of four certification levels, depending on the total points earned during the review process:

  • LEED Certified: 40 to 49
  • LEED Silver: 50 to 59
  • LEED Gold: 60 to 79
  • LEED Platinum: 80 or more

If your project is certified, it means your sustainability efforts have paid off. In addition, the LEED Certification is a powerful marketing tool that proves your company is environmentally responsible. Also, if you are certified at the Silver level or above, you earn a discount on subsequent applications.

Concluding Remarks

Aiming for a LEED certification ensures that the latest green construction practices are implemented in your project, which will greatly reduce your operating costs in the long run. In addition, the certification validates your company as a corporate citizen, which has significant marketing benefits.

Architects, mechanical engineers and other professionals in the green construction industry can add great value to their professional record by becoming LEED Green Associates and Accredited Professionals. Green buildings are a strong trend in the construction industry globally, and professionals with LEED credentials can gain a significant competitive advantage.

Top Ssearch Queries Related to HVAC Companies in or near Chicago