HVAC Winthrop Harbor2018-12-03T23:38:07+00:00

HVAC Winthrop Harbor | Expert Power Efficient System Designs

How To Become An HVAC Engineer
Contact Us

Do not be misled by the name NY Engineers is your best bet if you are searching for Full Service Heating Cooling Air Conditioning Furnace (HVAC) Engineering Firm in Chicago Illinois. We’re not only an HVAC Chicago but also a leading provider of Mechanical Engineering Engineering services in or near Winthrop Harbor. Call (312) 767.6877

Contact Us

Recently huge crowds have been stopping by the New York Engineers site in search of Architectural Engineering in or near the Chicago area. That is due because of the following we have develop in this kind of work. However, a lot of general contractors from Lynwood to Springfield, Illinois, don’t know that New York Engineers is also the ideal choice for anyone looking for HVAC Contractor in Chicago.

The pursuit of energy efficient buildings involves energy efficient HVAC system design. This can include systems for domestic water heating, architectural enclosure, HVAC, lighting, and vertical transportation. The loads for that HVAC systems may come primarily from 5 different places including lighting (cooling), the property envelope (cooling and heating), ventilation (cooling and heating), equipment for program use (cooling) and occupancy (cooling).
The ventilation load will be a function of either the devices required to be able to introduce it in a space and control contaminant concentration or the amount of individuals which will use the place. In virtually all climates in the eastern and southwestern areas of the usa, to reduce outter air movement helps you to save energy whenever the exterior air is either warm and humid or very cold.
Governing the ventilation rate is going to be dependant upon occupancy which is known as a kind of demand control ventilation. It is a common type of energy conservation tatic that is utilized for buildings with intermittent or crowded occupancy. Having heating and cooling loads dropped as low as possible can be achieved by making use of a higher performance building envelope, occupancy sensors, and performance lighting that employs daylight response of lighting controls.

Chicago HVAC Engineers vs HVAC Technicians

If you’ve ever wondered about the distinction between a HVAC Engineers vs HVAC Technicians, then keep reading:

Chicago HVAC engineers are the people that watch over setting up of air conditioning systems for residential and commercial buildings. They spend a great deal of their day in offices doing advanced level management and arranging of installations but they do also stop by job sites every now and then.

In comparison, HVAC technicians often do a lot of the hands-on work  that deals with maintenance and repair. A HVAC technician may work together with an engineer to accomplish a few of the installation task, specifically for smaller jobs. Generally speaking HVAC techs do considerably more travel and may spend time and effort changing filters, identifying leaks, doing recharges or getting rid of old and outdated systems that utilize old refrigerants.

HVAC engineers could have the chance to make more decisions about systems that are employed, and so they would be the folks that would offer advice about one of the most sensible refrigerants and which systems would best suit a bigger building. In the trade, there is some rivalry between ‘the suits’ and ‘the ones which get their hands dirty’, but both jobs require a great expertise in how air conditioner does work. Nowadays many individuals have been crawling our sites searching for things like Best HVAC Chicago. Nevertheless, the focus of our company is to be the to go to company for those searching for a HVAC Firm in or near Chicago and or any of our other services including Sprinkler Engineering services. We ask that everyone looking for additional details about our Air Conditioning, Heating & Cooling (HVAC) Engineering Firm in Chicago Illinois stops by at our blog.

Blog Post Related to HVAC Contractor in or near Chicago

A Look at Cable Bus, Courtesy of Electrical Engineers

Fire Protection Engineering Schools

Cable installation is one of the activities that demand the most man-hours from electrical engineers in building construction and renovation projects. The use of a reliable wire management system makes the installation simpler and safer, and cable bus is very useful when dealing with medium-voltage conductors. The NFPA 70 National Electrical Code dedicates Chapter 3 to Wiring Methods and Materials, including raceway systems for conductors above 600V.

Cable bus is used with conductors much larger than those delivering power to lighting fixtures, power outlets and HVAC equipment in your home or office. The rated voltage exceeds 600V, while the current range is typically from 1,000A to 8,000A. There are other raceway options for large conductors, such as busway and cable tray, but cable bus offers a middle point that brings advantages of both.

Wireways for Conductors Above 600V

When dealing with conductors and their raceway systems, the NEC establishes additional requirements when rated voltage exceeds 600V in a given application:

  • Conductors above 600V must not share enclosures and wireways with circuits below 600V, unless a specific code article makes an exception.
  • Circuits above 600V must use suitable enclosures to prevent accidental contact or physical damage.
  • The smallest bend radius allowed is 8 times the diameter for unshielded conductors, and 12 times the diameter for shielded conductors. Multi-conductor cables are limited to 12 times the individual conductor diameter or 7 times the total diameter, whichever is less.
  • Metallic raceways must be protected from induction heating.
  • Consider there are differences between the requirements for above-ground and buried conductors.

To compare busway, cable bus and cable tray, first we must define each type of raceway, as they are understood by electrical engineers:

RACEWAY TYPEDESCRIPTION
BuswayGrounded metal enclosure, which comes with factory-installed conductors. These can be bare or insulated; made from aluminum or copper; and shaped as bars, rods or tubes.
Cable busAssembly of insulated conductors that includes fittings and terminations, all enclosed in a ventilated metallic housing for protection. Unlike busway, which is fully factory-assembled, cable bus is partially assembled at the project site. Cable bus is designed to withstand the magnetic forces present during faults, reliably holding conductors in place.
Cable trayA structural assembly with multiple sections and fittings, designed to fasten wiring or smaller raceways.

Ask Electrical Engineers: What Advantages Does Cable Bus Offer?

Cable bus is characterized by its safety, since it is built to withstand the magnetic forces that occur when one of the conductors carries a fault current. Cable bus also offers a middle ground between the fully prefabricated busway and the site-assembled cable tray.

Cable bus also saves on supporting fixtures, by using some prefabricated components while retaining flexibility in conductor layout. In a few words, cable bus offers a rigid construction like busway, while having wiring flexibility and open ventilated construction like cable tray. Some common applications of bus duct include connections between the following equipment:

  • Generatorsand transformers
  • Generators and switchgear
  • Transformers and switchgear
  • Different switchgear units
  • Switchgear to motor control centers (MCC)
  • MCCs and high horsepower motors

Electrical safety is important in any installation, but additional protection measures are required as voltage level increases, since accidents have a greater potential to cause damage. By working with qualified electrical engineers you can ensure your installation meets the NFPA 70 National Electrical Code, in addition to local standards.

Searches Related to HVAC Chicago