(MEP) Engineering Service in North Lawndale Chicago2018-09-20T10:18:40+00:00

MEP Engineers North Lawndale Chicago!

Contact Us

If you re searching for a dependable MEP Firms in Chicago? The one to go to is is NY-Engineers.Com. Not only for MEP Engineering in Chicago but also Value Engineering and Sprinkler Engineering near North Lawndale Chicago. Call (312) 767-6877

Contact Us
Construction Engineering Companies

Many general contractors throughout Syosset, NY have come to depend on New York Engineers for a wide range of engineering services ranging from MEP Engineering to Engineering Reports. For this reason developers in North Lawndale Chicago will tell you that if you’re looking for a excellent MEP Engineering firm in North Lawndale Chicago, Illinois you need to consider NY-Engineers.Com.

A mechanical, electrical, plumbing engineer, or MEP engineer, is a huge asset. They are prepared for a variety of assisgments. What do MEP engineers do? Keep reading if you’d like to understand more about the tasks they take on.

They Design and Plan Systems: A building will need to have a properly designed electrical system, and a building’s water system needs to be developed by a pro as well. The particular engineer that’s in charge of this planning is undoubtedly an MEP engineer. Designing these sorts of systems is incredibly complex, which is the reason that MEP engineers receive extensive training. The work which they do isn’t easy by any means. Having said that, structures with proper electrical and plumbing systems are less at risk of problems than structures with carelessly designed systems.

They Develop Policies and Standards: As well as crafting the systems for the building, it is the job of MEP engineers to formulate the policies and standards for a building. An MEP pro work to make standards that happen to be right for a building. They may adjust or add to the benchmarks for the building as needed.

They Put Together Evaluation Tools: In order to ensure that the technique is operating as intended, numerous evaluation tools will need to be developed. Somebody that works as an MEP engineer can have to generate the correct assessment tools. If you have a problem in the system, that challenge is going to be analysed and fixed without delay.

What exactly do MEP engineers do? As you have read, these pros manage various essential jobs. In the event you make time to find out more about the duties that these particular engineers manage, you’ll be capable of determine regardless of whether an engineer like this may be an focal point in your company.

Why You Want MEP in North Lawndale Chicago if Planning Massive Construction Projects

You may not think that you will need MEP engineering mentors, but you might have a different take on on the problem after you see what I have stated. The following is why I could like MEP engineers were they to begin a large-scale construction project. I am not mearly going to give you a few reasons; I am going to give you quite a few of them.

Building designs throughout Bridgeport Chicago, Illinois, are quite difficult, and you have to consider HVAC, plumbing and electrical designs. Should I say more? Well, I did point out that I would provide you more than one or two reasons. There is a lot more than the obvious when designing a building and these two important examples are a good way to lead things off.

One reason that one requires MEP engineers while undertaking a huge construction project likewise involves lighting and electricity. This can be a great time to bring up that energy management is another reason. A thorough policy for energy management includes the entire building and just how it is outfitted.

Security and fire alarms are one more chief reason to get MEP engineers. You are going to want them that will help you design a strategy for the fire security systems and escape routes. Security and safety are dealt with in several alternative methods in relation to the design of a building, also.

MEP engineers in Uptown Chicago, ILO, are willing to not simply assist you in the form of a building but take control using the expertise and knowledge required to manage this kind of project. Building automation, operational maintenance and value in complete design are just a few other reasons why you might like to put MEP engineers at the helm in terms of the big scale construction project you might have planned. If your firm or you would like additional details about the MEP Engineering services in North Lawndale Chicago, Illinois by New York Engineers you should check out at our Fire Protection Engineering blog.

Latest Electrical Engineering Related Blog Article

Heat Source Comparison: Heating Oil and Natural Gas According to MEP Engineers

Mechanical Engineers

Heating oil and natural gas are both fossil fuels, but they have very different properties. At room temperature, one is a viscous liquid while the other is a gas. For a given heating output, there is also a difference in the amount of natural gas or heating oil that must be burned, as well as the greenhouse gas emissions produced.

Heating oil is normally measured in gallons, while natural gas is measured in cubic feet. Therefore, it is easier to compare their performance based on heating output – the US Environmental Protection Agency compares their emissions per million BTU (mmBTU) of heat. This is how MEP engineers and other engineering professionals stack these two heating methods up against each other.

Comparing the Emissions of #2 Heating Oil and Natural Gas

According to the US EPA, #2 heating oil releases 73.96 kg of CO2 per mmBtu of heat, while natural gas produces 53.06 kg of CO2 per mmBtu. In other words, #2 heating oil produces almost 40% more carbon dioxide per unit of heat, and this is even higher for the types that have been phased out by legislation, #4 and #6. Compared with heating oil, natural gas also produces reduced amounts of sulfur oxides, nitrogen oxides and soot.

Another key greenhouse gas is methane (CH4), and replacing #2 heating oil with natural gas also reduces its emissions. The US EPA has determined that natural gas usage releases 1 g of CH4 per mmBtu, while #2 fuel oil releases 3 g of CH4 per mmBtu. Keep in mind that the global warming potential of methane is 25 times higher than that of carbon dioxide.

Nitrous oxide (N2O) is even worse than methane, having a global warming potential 298 times higher than carbon dioxide. While #2 heating oil emits 0.60 g of N2O per mmBtu, natural gas only emits 0.10 g of N2O per mmBtu.

Even greater emissions reductions can be achieved when an old and inefficient oil boiler is replaced with a hhigh-efficiencynatural gas boiler, according to expert MEP engineers. Assume the oil boiler has an Annual Fuel Utilization Efficiency (AFUE) of 60% while the new gas boiler offers 95%. To produce one million Btu of heating output, the required input would be the following:

  • Oil boiler input = 1 mmBtu / 0.60 = 1.67 mmBtu
  • New gas boiler input = 1 mmBtu / 0.95 = 1.05 mmBtu

Considering the emission intensity values above, this oil boiler releases around 123 kg of CO2 while the gas boiler releases 56 kg of CO2. The emissions reduction value of 28% applies when both boilers have the same efficiency, but in this case CO2 emissions are actually reduced by 54% because the new boiler is more efficient while using a less polluting fuel. Although this is a broad estimate, it provides an example of how superior boiler efficiency and conversion to natural gas work together to reduce emissions. The same effect applies for other greenhouse gases such as methane and nitrous oxide.

However, it is important to note that natural gas is still a fossil fuel. Having the word “natural” in its name may cause the false impression that it is a renewable energy source, but this is not the case. Natural gas is simply less polluting than other fossil fuels but has a negative environmental impact nevertheless.

MEP Engineers Explain Con Edison Incentives for Natural Gas Conversion

Property owners in a major city who are considering a switch from heating oil to natural gas may be eligible for cash incentives from your utility supplier. This reduces the cost of a fuel conversion project while keeping all the benefits, improving its financial viability. There is also a reduction in heating expenses, so it is possible to analyze the project in terms of cost and benefit.

Final Recommendations

There are many reasons to convert building heating systems from heating oil to natural gas. First of all, the US Department of Energy has determined that natural gas has a lower heating cost than fuel oil. Natural gas also has a much lower emissions intensity than #2 heating oil, and this benefit is enhanced when an aging oil boiler is replaced with a high-efficiency natural gas boiler.

Professional guidance is strongly recommended, like with any engineering project, especially because natural gas poses a risk of fire. In addition, the combustion products must be properly exhausted, and can threaten human life if allowed to accumulate in closed spaces. Engineering services also ensure code compliance. Upgrading from oil to natural gas is not as simple as removing one boiler or furnace and installing a new one – for example, the gas service entrance and chimney may need an upgrade.

Recruit the help of MEP engineers and other professionals in the field before moving forward with any upgrade of this caliber.

Top searches related to Sprinkler Engineering North Lawndale Chicago, IL.