MEP Engineer Service in Las Cruces New Mexico2019-01-23T08:50:08+00:00

MEP Engineer Service Las Cruces New Mexico

Value Engineering Examples In Construction

Many top developers in Nebraska are aware that NY Engineers is one of the top firms if you are in search of the best Engineering Reports Services. Nevertheless, and with the company’s rapid growth many people have failed to our knowledge that NY-Engineers.Com is without a doubt top choice if you are searching for MEP Engineering Service near Las Cruces New Mexico.

MEP means mechanical, electrical, and plumbing. Specifically, within the construction industry, MEP identifies these elements because they are active in the constructing and designing of buildings. Any engineer that works well to produce the design and oversees the construction of a building can be a MEP Engineer.

Do you know what MEP Engineer in Construction mean specifically? A person given the job of engineering the major systems in a new building is mainly responsible for making certain most of these systems were created and developed based on all local and government codes. Whenever a building is about to be erected, the MEP engineer is definitely the person, or the firm, accountable for making sure these essential systems are built so the building is designed for safe human occupancy.

In locations where building prices are high, like in large cities, a MEP engineer’s job results in a building that costs less to erect. This is because these professionals are experienced and educated in the style of all plumbing, electrical and mechanical building components. They learn how to execute the design and style plans so the costs of construction are mitigated without interfering with the building’s structural strength or habitability.

MEP Engineers help construction projects be completed inside a timely manner while being completely approximately building codes. Newly constructed buildings will pass inspections quicker and be ready for occupancy sooner.

Employing A Revit MEP Engineer in Las Cruces New Mexico

With regards to getting a Revit MEP engineer, there are lots of considerations to make. It is important to take the different steps and make a viable checklist before advancing. Here are one of the key qualities to help keep note of when combing through all the options put in front of you.

1) Know-How – How experienced are they and what are some of the fresh projects they have been a part of? That needs to be on your mind as your skill is what matters in such a profession.

2) Credentials – Naturally, credentials should not be omitted in regards to such a hiring. You will want to make certain everything checks out in terms of their credentials.

3) Experience – For sure, many years of expertise and having the credentials could play a role but it really often comes down to common professionalism.  How professional is a Revit MEP engineer when it comes to managing projects and being able to communicate in an organized method?

This is actually the question you have to ask. Consider these details and you may end up getting someone that is ahead of their contemporary and is definitely a complete professional! At NY Engineers, we realize that many individuals did not know that we offer MEP Engineer in or near Las Cruces New Mexico, that is why we urge all of you to stop by our blog…

Post Related to MEP Engineer in or near Las Cruces New Mexico

Electrical Engineers Explain Electric Vehicle Charging Stations

Construction Engineers

Electrical engineers have noted that electric vehicles are gaining a larger share of the automotive market, while also becoming more affordable. Environmental awareness has become a key driving force in EV adoption among consumers, and businesses are realizing they can attract these drivers by offering EV charging stations. Some government programs such as the California Zero Emission Vehicle (ZEV) rule are requiring automakers to offer more environmentally friendly vehicles.

The emissions reduction potential of EVs is significant because they can run with electricity generated by wind turbines or solar panels. Even if an EV relies on a power grid where most electricity comes from fossil fuels, there is a reduction of emissions: power plants use fossil fuels much more efficiently than the combustion engines on cars.

Electric Vehicles and Charging Time

Plug-in electric vehicles (PEVs) obtain most or all of their power from electricity supplied by the power grid. Plug-in hybrid electric vehicles (PHEVs) offer 3-4 miles per kWh of charge, as a rule of thumb, although this may vary depending on driving habits.

There are two main factors that influence battery charging time:

  1. Battery capacity, typically measured in kilowatt-hours (kWh). It typically ranges from 4 to 90 kWh, depending on the type of vehicle.
  2. Charging station features: capacity and limit charging speed.

The rate at which the car can accept charge is measured in kilowatts (kW). Each vehicle has its own maximum rate based on its internal charging capacity, and may or may not have a separate DC charging port.

Electric Vehicle Charging Stations

EV charging stations can be classified into three types, based on their charging method:

  1. Level 1 charging
  2. Level 2 charging
  3. DC fast-charging

Level 1 charging uses the standard 120 V AC power supply and offers 2 to 5 miles of range per hour (RPH). Depending on the car and battery specifications, it takes 8-20 hours to add 40 miles of range. Level 1 charging typically uses a three-pronged NEMA 5-15 standard household plug.

Level 2 charging uses a residential or commercial 208-240V power supply and the vehicle’s onboard charger, offering 10 to 30 miles of range per hour. Level 2 charging is characterized by protecting the user from electrified components: commercial units are hard-wired and free from exposed power outlets, only establishing an electric current once connected to the vehicle.  These stations can be installed as a stand-alone system or in a network configuration.

DC fast charging was previously called level 3 charging, requiring 208-480V three-phase power. The charger converts the power input to DC and supplies it directly to the battery. DC fast charging offers up to 100-200 miles of range per hour and takes 15 to 45 minutes to charge from 0 to 80 percent, depending on the vehicle.

Level 2 charging works best where parking times are longer than an hour, which includes overnight charging at homes or hotels, workplace charging or fleet charging. Level 2 charging is also feasible during dining, sports, recreation and shopping.

DC fast charging best serves businesses and locations where the average parking time of the customer is less than one hour. It can be used to complement Level 2 charging. However, take note of the consequences when using the wrong type of charger: a LV2 charger offers a bad user experience for a short parking time, and using DC fast chargers where the vehicles will stay parked for long represents a waste of resources.

Electrical Engineers Detail Relevant Codes and Regulations

In some cities, the following provisions apply for electric vehicle charging in garages and parking lots:

  1. Conduit and solar panel capacityfor up to 20% of newly created parking stalls. This applies for garages and parking lots.
  2. Attachment plugs, EV connectors and inlets must be labeled for their intended purpose.
  3. EV supply equipment must be provided with an interlock.
  4. Overcurrent protection for feeders and branch circuit supplying EVs shall have a rating of at least 125% of maximum load.
  5. The EV supply equipment shall be located to permit direct connection to the vehicle itself.

Conclusion

AC Level 1 and 2 charging provide AC power to the vehicle, where the vehicle’s onboard charger converts AC to DC power needed to charge the batteries. Planning, including site assessment and selection considerations, and assessing electrical needs and availability, is critical for functional, aesthetically pleasing and cost-effective installations that can meet present and future needs. If you need any help in understanding these concepts, it’s best to confer with experienced electrical engineers.