MEP Engineer Service in San Leandro California2019-01-23T18:42:37+00:00

MEP Engineer Service San Leandro California

MEP Engineering Books

Many top general contractors throughout Nevada know that NY Engineers is the right candidate if you are looking for Engineering Reports Services. Nevertheless, primarily because of the company’s constant expansion many contractors have failed to realize that NY-Engineers.Com is without a doubt best choice if you are searching for MEP Engineer in or near San Leandro California.

MEP means mechanical, electrical, and plumbing. Specifically, within the construction industry, MEP identifies these elements as they are involved in the design and construction of buildings. One engineer that works to develop the look and manages the erection of a building can be a MEP Engineer.

Do you know what MEP Engineer in Construction mean specifically? A person tasked with overseeing the most important systems of a new building is responsible for ensuring that most of these systems are designed and developed in accordance with all local and government codes. Every time a building is about to be put up, the MEP engineer may be the individual, or even the firm, in charge of making sure these essential systems are designed to ensure the building is best for safe human occupancy.

In locations where building costs are high, like in large cities, a MEP engineer’s work results in a building which costs less to throw up. The reason being these experts are experienced and knowledgable in the design of all plumbing, electrical and mechanical building components. They realize how to carry out the design and style plans so that the costs of construction are eased without compromising the building’s fundamental strength or habitability.

MEP Engineers help construction jobs be completed within a timely manner while being totally approximately building codes. Newly completed buildings will pass inspections quicker and be ready for occupancy sooner.

Working With A Revit MEP Engineer in San Leandro California

When it comes to employing a Revit MEP engineer, there are numerous considerations to make. It is of great consequence to take the many steps and come up with a viable checklist before advancing. Here are one of the key qualities to keep note of when scouring through all the options put in front of you.

1) Knowledge – How capable are they and what are the new assignments they were part of? That needs to be on your mind since your experience is what matters in this particular career.

2) Documentations – Naturally, diplomas should not be ignored when it pertains to such a hiring. You will need to make sure everything checks out in terms of their credentials.

3) Professionalism – Certainly, all those years of experience and having all the qualifications will play a role but it really often is dependant on overall experience.  How professional is a Revit MEP engineer with regards to overseeing projects and having the capacity to communicate in an organized method?

Here is the question you must ask. Consider these details and you may end up with somebody who is ahead of their time and is truly a total professional! We are aware that some of these developers and general contractors don’t know that we offer MEP Engineer in or near San Leandro California, this is why we urge everyone to visit our Electrical Engineering blog.

Post Related to MEP Engineering Service near San Leandro California

Heating and Cooling Upgrades: Where to Start? Architectural Engineers Have This Advice

Construction Engineer Job Description

Space heating represents the highest energy use in many buildings. In addition, domestic hot water and space cooling systems use less energy than space heating, but they are also among the top five building systems that use the most energy. According to architectural engineers, a building can reduce its energy consumption dramatically by replacing its existing heating and cooling systems with modern and high-efficiency equipment.

However, before proceeding with a large-scale building upgrade it is necessary to define a starting point. Building upgrades are investments after all, where the property owner spends capital with the goal of achieving a permanent reduction in building ownership cost. In other words, building system upgrades only make sense from the financial standpoint if the long-term benefit outweighs the associated upfront expenses.

Is There an Upcoming Major Renovation?

Heating and cooling upgrades provide long-term benefits but can be disrupting for building operation. If a major renovation is planned in the short term, it represents an excellent chance to also improve HVAC performance.

A major renovation also provides an excellent chance to improve the building envelope, architectural engineers advise. Poor insulation and air leaks can be detected and fixed, reducing the required heating and cooling capacity after the renovation. This way, the new heating and cooling systems can be specified not only with a higher efficiency, but also with a lower capacity.

  • For example, if you replace a 100-ton air-cooled chiller consuming 1.2 kW/ton with a more efficient water-cooled unit that only uses 0.6 kW/ton, you achieve 50% energy savings.
  • However, if the new unit has a required capacity of only 80 tons thanks to building envelope improvements, energy savings are increased to 60%.

A building envelope improvement can be complemented with a lighting system upgrade. Solid-state LED lighting emits significantly less heat than incandescent, halogen or old fluorescent lighting. All this heat is subtracted from space cooling loads, providing additional energy savings beyond those achieved directly with the lighting upgrade.

Consider that a 60-watt incandescent bulb can generally be replaced with a 10-watt LED bulb, and a 4-lamp T12 fluorescent fixture (4x 34W) can generally be replaced with an integral LED fixture consuming 40-45W. The lighting heat reduction is not significant for a single fixture, but can save several tons of cooling capacity in a building with hundreds of inefficient fixtures.

Building Upgrades: Cost and Benefit

When upgrading a building it can be tempting to prioritize space heating systems, since they consume the most energy. However, it is also important to consider the energy source used by each appliance.

For a given amount of energy delivered, electricity is far more expensive than gas in major cities. Natural gas from Con Edison has a price of around 1.05 USD per therm for residential users, which translates to approximately 3.6 cents per kWh of heat, before considering appliance efficiency. On the other hand, electricity prices typically exceed 20 cents per kWh. Even if most combustion appliances are less efficient than electric appliances, the price of electricity is too high compared with that of gas. This effect is evident in electric resistance heaters, which are around four times more expensive to operate than gas heaters.

Property owners can achieve the best results by getting a professional energy audit before deciding which building upgrades to carry out. With an energy audit, property owners can get a detailed breakdown of energy efficiency measures, along with the expected cost of each. More importantly, an energy audit helps determine the return on investment for each energy efficiency measure – how many dollars will it return over its service life for each dollar spent upfront? Given the price gap between electricity and gas, upgrades that target electric system generally offer a shorter payback period and a higher ROI.

Before proceeding with any building upgrade, checking the Con Edison incentive program is highly advised. Many energy efficiency measures are eligible for attractive cash rebates, which further improves their financial performance. Consider that some rebate programs only apply during certain times of the year or have limited funding, so building upgrades should be planned accordingly.

Importance of Building Type to Architectural Engineers

Not all buildings consume energy the same way. For example, mechanical ventilation typically represents around 13% of energy use in office buildings, but only 1% in multifamily residential settings. This is a consequence of the requirements established by construction codes for each property type – natural ventilation design is mandatory in residential constructions, but designers can choose between natural and mechanical ventilation for office buildings. Domestic hot water systems experience the opposite effect as ventilation systems, representing only 2% of energy use in office buildings but 19% in multi-family residential buildings.

Differences like this are present for many building systems. For example, office occupancy is normally higher than residential occupancy during the day, which extends lighting and space cooling schedules for office buildings, and the corresponding energy expense. However, this does not mean lighting and cooling upgrades should be discarded in the residential sector: these systems represent a reduced percentage of energy consumption but are typically older than those found in office buildings, which can result in an attractive financial return.

Final Recommendations

When deciding which cooling and heating upgrades to prioritize, it is very important to select an adequate time frame for the project, and getting an energy audit to determine the cost and benefit of each measure. Ideally, deep retrofits should be scheduled along with major renovations to minimize disruption and cost. It is also important to find synergy between upgrades, for example when both lighting and space cooling are upgraded. Of course, the financial return is also a very important consideration: as a property owner you will want to prioritize measures that maximize the return on each dollar invested.

In general, energy efficiency measures that target electric systems will have a better financial performance than those targeting gas-fired systems. Nevertheless, there are exceptions to this; an energy audit of the building is the best way to tell, agree experienced architectural engineers.